Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
This volume control affects only the Song volume. The volume range is 000 - • Song Volume cannot be changed unless the Song mode is active. 127. (This function becomes Style Volume when the Style mode is active.) 55 Song Recording Song Recording record and save up to five User songs. rECUser 1 001 Song recording on the DGX-200 is similar to using a tape recorder; whatever you play on the keyboard is recorded in real time as you play it. Also, when you record subsequent parts to other tracks, you can hear the previously recorded parts as you record new ones. Song Memory Capacity • Maximum number of notes : approximately 10,000 (when only “melody” tracks are recorded) • Maximum number of chords : approximately 5,500 (when only the chord track is recorded) Recording a User Song Data that can be recorded to the normal (melody) tracks: • Note on/off • Velocity • Voice Number • Volume • Pan • Tempo*, Time Signature* (if there is no such data in the Chord track) • Sustain on/off • Reverb Type* • Chorus Type* • DSP Type* • Harmony Type, on/off • Reverb Send Level • Chorus Send Level • DSP Send Level Data that can be recorded to the Chord track: • Chord changes and timing • Style number* • Style Volume* • Changing sections (Intro, Main A/B, etc.) • Tempo, Time Signature* • Reverb Type* • Chorus Type* • DSP Type* * These settings can only be recorded once at the beginning of a song; other settings can be changed in the middle of a song. 1 Make all desired DGX-200 settings. Before you actually start recording, you’ll need to make various settings for • When using a Split Voice for recording, the voice assigned to the song — such as selecting a style, setting the Tempo, and selecting a the left of the split point cannot be recorded. voice. (See pages 35, 41, and 23.) If desired, also make other settings. Refer to the list above for settings that can be recorded to a song. 56 Using the Metronome You can use the Metronome instead of a style if desired. This allows you to keep your performance “in time,” even when recording without style. To do this, press the [METRONOME] button before recording in step #4 below. After the song is completely recorded, simply play back the song with the Metronome turned off. (See page 20.) Song Recording Song Recording Select a User song number for recording. Use the dial or numeric keypad to select the desired song: 201 - 205. If no song is manually selected, the DGX-200 automatically selects the first available empty song number. 202User 2 or 3 Select a track number for recording. While holding down the [REC] button, press the appropriate SONG MEM • Keep in mind that all recording operations “replace” the data. ORY button. In other words, if you record to a track that already has recorded data, all previous data in the track will be erased and replaced by the newly recorded data. rECUser 2 001 Recording to the Chord Track A special Chord track is provided for recording accompaniment data. This is automatically recorded to the Chord track (track A). Selecting the Chord track automatically turns on the accompaniment. Recording to a Melody Track (1 - 5) Five independent Melody tracks are provided for recording your keyboard performance. Normally, you’ll want to record these after you’ve recorded the Chord track. You can also record the Chord track and one of the Melody tracks simultaneously. • If accompaniment has already been turned on before entering the Record mode, the Chord track is automatically selected. 57 Song Recording Muting Tracks During Playback While recording is enabled, you can selectively mute different tracks. This is useful for when you want to clearly hear certain tracks, and not others, during recording. Muting can also be done “on the fly” during playback. To use muting, press the corresponding SONG MEMORY button, repeatedly if necessary, until the desired track number in the display is off. Each press of a SONG MEMORY button (when playback is stopped) cycles through the following settings: Track number flashes — Track will record.* * Cannot be selected during playback. Track number off — Track is muted. Track number on — Track will play back. Song Recording Muting Tracks During Playback While recording is enabled, you can selectively mute different tracks. This is useful for when you want to clearly hear certain tracks, and not others, during recording. Muting can also be done “on the fly” during playback. To use muting, press the corresponding SONG MEMORY button, repeatedly if necessary, until the desired track number in the display is off. Each press of a SONG MEMORY button (when playback is stopped) cycles through the following settings: Track number flashes — Track will record.* * Cannot be selected during playback. Track number off — Track is muted. Track number on — Track will play back. Start recording. When the beat marks and track number start flashing, you can start recording simply by playing the keyboard (or by pressing the [START/STOP] button). rECUser ...