Click the File Select button (3), select a file including your desired Voice(s) so that the folders in the selected file are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select a destination location in the Destination Voice list (9) of the current file, then click [Import] (5) to execute the Import operation. 234 56 1 6 7 )8 79 MOX6/MOX8 Editor VST Owner’s Manual 35 Menu: [File] menu 1 [X] (Close) button Click this to close this window without importing. 2 File name (Indication only) Indicates the currently selected file. 3 File selection button Click this to open the dialog for file selection. 4 [Category]/[Bank] checkboxes Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into Categories or Banks. 5 [Import] button Click this to actually import the Voice(s) selected in the Source Voice list (8) to the specified location in the Destination Voice list (9). n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the Source Voice list then dropping it to the Destination Voice list. n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank. 6 [+]/[–] buttons Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders. 7 Folder button (Bank or Category) Double click here to open or close the folder. 8 Source Voice list Indicates the Voices or folders of the selected file to be imported. By right-clicking (Windows) / key + clicking (Mac) this section and selecting a menu, you can perform the following functions. • Opening/Closing all the folders • Determining whether the Voices listed here are divided into Category folders or Bank folders 9 Destination Voice list Indicates the Voices or folders currently edited on the MOX6/MOX8 Editor VST. n By right-clicking (Windows) / key + clicking (Mac) this section and selecting a menu, you can open or close all the folders. ) Search box You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here. MOX6/MOX8 Editor VST Owner’s Manual 36 Menu: [File] menu Menu: [File] menu Determines the basic setup of the MOX6/MOX8 Editor VST. After setting necessary parameters, click [OK] to actually apply the settings to the MOX6/MOX8 Editor VST. 134562789! ) @# 1 [X] (Close) button Click this to close this window without applying the settings. This button is the same as the [Cancel] button (#). 2 [Detail] button You can make detailed settings for the Input Port and Output Port by setting this button to “On.” This setting is necessary if the Port name is changed on a computer. 3 MIDI Set the MIDI Port for communication between the MOX6/MOX8 Editor VST and the MOX6/MOX8 instrument. When the [Detail] button (2) is set to “Off,” select a value such as “Yamaha USB 0” or “MOX6/MOX8” at the top left column. When the [Detail] button (2) is set to “On,” select Port 4 for the MIDI In setting, then select Port 1 and Port 4 for the MIDI Out settings. n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0”), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the Cubase series. n Keep in mind that setup on the Cubase series is necessary before making settings here. n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the MOX6/ MOX8 instrument. 4 Device No. Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the MOX6/MOX8 itself. When the Device number on the MOX6/MOX8 is set to “All,” set the Device No. here to “1.” MOX6/MOX8 Editor VST Owner’s Manual 37 Menu: [File] menu 5 Auto Sync Setting This section lets you set how the data synchronization between the MOX6/MOX8 Editor VST and the MOX6/MOX8 instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data synchronization is executed from the Auto Sync window (page 50) called up automatically under certain circumstances such as clicking the [OFFLINE] button, starting the MOX6/MOX8 Editor VST and opening a new file on the Editor. Global Determines whether or not the Global data (see page 3) is synchronized and which data (MOX6/MOX8 Editor VST or MOX6/MOX8 itself) is synchronized with the other. Current Determines whether or not the Current data (see page 3) is synchronized and which data (MOX6/MOX8 Editor VST or MOX6/MOX8 itself) is synchronized with the other. Voice Determines whether or not the Voice data (see page 3) is synchronized and which data (MOX6/MOX8 Editor VST or MOX6/MOX8 itself) is synchronized with the other. Auto Start When this is set to “On” and one of the following operations is executed, data synchronization will be started aut...
