Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Fabrique aux Etats-Unis Hecho en EE.UU. Please read, understand and keep this manual for future reference Lire et bien comprendre les instructions contenues dans ce manuel et les conserver comme reference. Por favor lea, comprenda y guarde este manual para futura referencia. Description & Introduction The Masterflow® Heat Blower is a heavy-duty, industrial- quality heat blower suitable for continuous duty applications. It produces a high volume of hot air for demanding industrial applications. The adjustable stand features a keyhole slot for easy equipment mounting and allows the nozzle capability of rotating 90° (horizontal to vertical). Your Masterflow® is equipped with a thermal fuse which will protect the element from overheating or burn out due to a nozzle blockage or motor failure. Heat blowers are a source of extremely high temperature flameless heat (up to 750°/400°C). As with other products which generate extremely high temperatures, regardless of your specific application, extreme care and caution should be observed when using this product. Therefore, we recommend that you pay particular attention to the safety instructions which we have provided for your protection. Specifications *Temperature Model °F °C Volts Amps AH-301 AH-302 AH-501 AH-502 AH-751 AH-752 300 300 500 500 750 750 50 150 260 260 400 400 120 220/240 120 220/240 120 220/240 10.0 5.2 14.0 7.3 18.0 9.4 *Average temperature measures 1" from nozzle. Important Safety Instructions WARNING: THIS PRODUCT IS A SOURCE OF VERY HIGH TEMPERATURE FLAMELESS HEAT. AS WITH ANY ELECTRICAL TOOL, WHEN USING HEAT TOOLS, ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS, INCLUDING THE FOLLOWING, TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY. 1) Read and understand this instruction manual before using. Save this manual for future reference. WARNING: To reduce the risk of fire or electric shock, do not expose heat blowers to rain or moisture. Store indoors. Connect to grounded outlet only. 2) Do not use plug adaptors or remove the ground prong from the plug. This tool is equipped with a 3-prong plug and a 3-wire grounding system. Connect to properly grounded outlets only. 3) Use heat blower only on adequately rated circuits to avoid overheating of electrical systems. 4) Masterflow Heat Blowers can produce up to 750°F/400°C of flameless heat out of the nozzle. Do not direct this hot air stream at your clothing, hands or body parts. Do not use as a hair dryer. 5) Do not touch nozzle opening or nozzle shield until cool. When in “Hot” mode, extreme heat is generated at those areas. Always hold tool by the handle or use permanently attached stand. 6) Run on “Cold” before turning off. The nozzle and shield require approximately 3 minutes to become cool to the touch. 2 Important Safety Instructions (cont’d) 7) Do not touch work surface with nozzle. Keep nozzle face at least 1" away. 8) Keep a clean work area. Messy or cluttered work areas invite accidents or injury. 9) Keep away from children. All visitors should be kept at a safe distance from the work area. Do not let visitors touch the tool or extension cord. 10) Use tool in a well-ventilated area. Do not use near flammable liquids or in an explosive environment (where fumes, gases or dust are present). 11) Remove all highly flammable materials and other debris from the work area. 12) Wear safety glasses at all times. 13) When using an extension cord, use only a 3-wire grounded cord with a minimum of 14-gauge capacity. We recommend they be listed by Underwriters laboratories (UL) in the U.S.A. or (CSA) Canadian Standards Association in Canada and be suitable for outdoor use. Cords marked for outdoor use are also suitable for indoor use. 14) Don’t abuse cordset. Never yank by cord to remove from electrical outlet or carry tool by cord. 15) Don’t remove adjustable stand. When not hand-held, place tool on a level surface. Position cordset so it does not cause tipping. 16) Keep a fully-charged fire extinguisher close at hand. 17) Do not leave heat blower unattended while the heat blower is running or cooling down. 18) Stay alert. Do not operate tool when you are tired. Use common sense and watch what you are doing. 19) Store properly. Do not store while hot. Store in a dry, high or locked-up location. Keep out of the reach of children. 20) Always unplug tool before performing any maintenance. When servicing, use only Master Appliance brand replacement parts. We recommend that all maintenance be performed by a qualified repair technician who is experienced in the repair of electric tools, a qualified service organization, or our repair staff. 21) WARNING: This product, when used for soldering andsimilar applications, produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. IMPORTANT SAFETY INSTRUCTIONS READ THESE INSTRUCTIONS WARNING: Hidden areas such as walls, ceilings, floors, soffit boards and other panels may contain flammable liquids that could be...