Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Pay particular attention to all sections regarding safety. Store your owners manual in a safe place. Warnings - “Don’ts” DANGER ROTATING FAN - KEEP HANDS AWAY. DON’T ATTEMPT TO REMOVE MATERIALS FROM INTAKE OR DISCHARGE WHEN BLOWER IS RUNNING KEEP CHILDREN, PETS, AND BYSTANDERS AWAY - DO NOT PERMIT CHILDREN TO CONTACT BLOWER. KEEP CHILDREN A SAFE DISTANCE FROM WORK AREA. NEVER ALLOW A PERSON MENTALLY ILL, UNDER INFLUENCE OF ALCOHOLIC DRINKS OR DRUGS OR TOO YOUNG IN AGE, TO OPERATE THE BLOWER DANGER - DO NOT INSTALL OR REMOVE ATTACHMENTS WHILE BLOWER IS RUNNING. TURN OFF ENGINE TO MAKE CHANGEOVER. BE SURE THROTTLE IS IN THE STOP POSITION, AND THE BLOWER HAS COME TO A COMPLETE STOP. REMOVE THE SPARK PLUG WIRE BEFORE REMOVING MATERIAL DON’T OVERREACH OR STAND ON UNSTABLE SUPPORT - Keep good footing and balance at all times. MULTIPLE OPERATORS - Keep a safe distance between two or more operators when working together simultaneously. DO NOT POINT THE BLOWER OUTLET in the direction of people, cars, glass, or other similar items which could be injured or damaged by blown debris. DO NOT ATTEMPT TO REPAIR BLOWER - Have repairs made by a qualified Little Wonder dealer or repairman. See that only Little Wonder and recommended engine manufacturers replacement parts are used. Warnings - “Do’s” DRESS PROPERLY — Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of sturdy gloves, non-skid footwear and safety glasses are recommended. Always wear ear protectors where possible. Use face filter to avoid breathing dust. STAY ALERT — Watch what you are doing and use common sense. Do not operate blower when fatigued. KEEP HANDS AWAY FROM AIR INTAKE AND AIR OUTLET CHUTE — Keep both hands on handles when power is on. MAINTAIN AND EXAMINE BLOWER WITH CARE — Follow maintenance instructions given in manual. Do not use the blower if the muffler is defective or missing. FAN COASTS AFTER TURN OFF IF BLOWER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED, THE USER RISKS SERIOUS INJURY TO THEMSELVES AND OTHERS READ AND UNDERSTAND THE FOLLOWING BEFORE ATTEMPTING TO OPERATE THIS BLOWER STORE BLOWER INDOORS — When not in use, store blower indoors in a sheltered, dry area where it’s not accessible to children. The blower, as well as fuel, should not be stored in a house. Keep throttle in the stop position. BE SURE BLOWER IS FULLY ASSEMBLED — Never operate blower without all guards and deflectors in place. Ensure that all nuts, bolts, screws are installed and properly tightened. KEEP THE THROTTLE IN THE “STOP” POSITION WHEN NOT IN USE. Always keep a safe distance between two or more operators when working together simultaneously. SAFETY Engine/ Fuel Warnings - “Do’s” HANDLE GASOLINE WITH CARE. IT IS HIGHLY FLAMMABLE. Refuel before starting work. Always use fresh gasoline. Stale gasoline can cause leakage. Always pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kick-back and prevent arm or hand injury. Replace gasoline cap securely. If fuel is spilled move blower and fuel container from area and do not create a source of ignition. Avoid spilling fuel or oil. Always wipe unit dry before using. Move at least 10 feet away from the fueling point before starting engine. Always store gasoline in an approved container. Fill tank outdoors with extreme care. WARNING! IN ORDER TO AVOID ENGINE DAMAGE DUE TO OVER-HEATING OR OVERREVVING, KEEP ENGINE RECOIL STARTER ASSEMBLY, THE BLOWER INTAKE AND OUTLET AREAS CLEAR AND FREE OF LEAVES OR OTHER DEBRIS Engine/ Fuel Warnings - “Don’ts” HANDLE FUEL WITH CARE, IT IS HIGHLY FLAMMABLE. FUELING A HOT ENGINE OR NEAR AN IGNITION SOURCE CAN CAUSE FIRE AND RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE Do not smoke while handling fuel. Do not refuel a hot or running engine. Do not fill tank indoors. CAUTION — Do not start or run engine indoors as poisonous carbon monoxide is emitted. Do not operate in unventilated area. Do not use the blower when electric system causes spark outside the cylinder. Check spark plug from time to time. When checking, keep plug a safe distance from cylinder to avoid burning of evaporated fuel from cylinder. ASSEMBLY Blower Assembly Instructions NOTE : Refer to parts lists, and illustrations on Pages 14-17. 1. Install lower handles 15 on top of deck 17 & 18. Secure with (4) cap screws 5/16-18 X 1-3/4 19, (4) 5/16 flat washers 16, and (4) 5/16-18 nylon nuts 1, finger tight. (See Figure 2) 2. Install upper handle 6 with (4) 5/16-18 X 1-3/4 cap screws 19, (8) 5/16 washers 16, and (4) 5/16-18 nylon nuts 1, finger tight. Tighten lower handle nuts and bolts. Tighten upper handle nuts and bolts until the lower handle tubing pinches the upper handle. It will be normal for the lower handle tubing to crush slightly. (See Figure 2) 3. Attach throttle cable 5 to upper handle 6 with (1) 1/4-20 X 1-3/4” cap screw 8 and (1) 1/4-20 locknut 10 through hole on upper handle 6 on the left handside. Insert the 10-32 X 3/4” self-tappin...
Este manual também é adequado para os modelos :Sistemas de ventilação - MAXIMUM OUTPUT BLOWER (1.61 mb)