Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
(2,743 mm) WIDTH 100 in. (2,540 mm) WEIGHT 1,605 lbs. (729 kg) BLOWER Blowing height* Over 100 ft. (Over 30 m) Blower housing 60 in. dia. (1,524 mm) Paddles (adjustable) 8 Paddle tip speed 8,460 ft./min. (2,579 m/min.) Drive Direct PTO HOPPER Diameter Auger-12 in. (305 mm) Length Auger-50 in. (1,270 mm) Width 37 in. (940 mm) Height from ground Adjustable-201/2 in. (520 mm) to 27/s in. (699 mm) Feeder type Auger DRIVELINE PROTECTION Shearbolt PTO 540 rpm TIRES 4.80-8 “C” load range CAPACITY (with adequate power) Corn silage* Up to 180 tons/hr. (163 mt/hr.) Haylage* Up to 110 tons/hr. (100 mt/hr.) OPTIONAL EQUIPMENT Pipe Clamp Kwik Pipe Bundle Telescoping Pipe Section Hinged Deflector Safety Tow Chain+ * Capacity and height will depend upon tractor horsepower, type of crop, moisture content, length of cut, as well as general maintenance of pipes and spout. + Available from New Holland Service Parts. Visit our Web site at Or, call toll-free 866-NEW-HLND (866-639-4563). Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas. © 2008 CNH America LLC New Holland is a registered trademark of CNH America LLC. Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator's Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Page 1 of 1...