Assessments - 4, GPA: 3.3
(
)
)
|
Facilidade de uso
* only BG 56, BG 86, SH 56, SH 86 BG 56, BG 66, BG 66 C, BG 86, SH56, SH 86 English / USA 295BA053 KN !Warning! To reduce the risk of personal injury from fire and explosion, never attempt to pick up hot or burning substances (e.g. smoldering ashes, glowing cigarettes) or combustible fluids (e.g. gasoline, paint thinners). !Warning! In order to reduce the risk of injury from contact with rotating parts and damage to the motor, the intake screen must always have the locking tab placed when the suction tube is not mounted. MAINTENANCE, REPAIR AND STORING Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. However if you claim warranty for a component which has not been serviced or maintained properly or if nonapproved replacement parts were used, STIHL may deny warranty. Use only identical STIHL replacement parts for maintenance and repair. Use of parts manufactured by others may cause serious or fatal injury. Follow the maintenance and repair instructions in the appropriate section of your owner's manual. Refer to the maintenance chart at the last pages of this manual. !Warning! Always stop the engine and make sure that the fan is stopped before doing any maintenance or repair work or cleaning the blower. Do not attempt any maintenance or repair work not described in your owner's manual. Have such work performed at your STIHL service shop only. Check fuel filler cap for leaks at regular intervals. Use the specified spark plug and make sure it and the ignition lead are always in good condition. !Warning! A worn or damaged muffler is a fire hazard and may cause loss of hearing. Check to see that the muffler is in good condition. The blower must not be operated if the muffler is not functioning properly or has been removed. Remember that the risk of forest fires is greater in hot weather. Use the spark arresting muffler supplied with the unit. Never touch a hot muffler or burn will result. BG 56, BG 66, BG 66 C, BG 86, SH 56, SH 86 English / USA Assembling the Blower !Warning! In order to reduce the risk of fire, do not modify or remove any part of the muffler or spark arrestor. Keep spark plug and wire connection tight and clean. The spark plug electrode gap should be checked with a feeler gauge at least every 50 operating hours and reset if necessary. Fit a new spark plug if the electrodes are badly pitted. For any maintenance please refer to the maintenance chart and to the warranty statement near the end of this manual. Store blower in a dry, high or locked location place and out of reach of children. Before storing for longer than a few days, always empty the fuel tank. 351295BA054 KN : Line up the arrows (1). : Push the blower tube (2) into the fan housing stub (3) as far as stop. : Push the union nut (4) over the fan housing stub and rotate it in the direction of the arrow until the tab (5) engages the hole (6) in the union nut. BG 56, BG 86, SH 56, SH 86 a295BA055 KN782b : Push the nozzle (7) onto the blower tube (2) as far as lug (8), position ’a’ (long) or position ’b’ (short), and rotate it in direction of arrow to lock in position. BG 66, BG 66 C a295BA056 KN782b : Push the nozzle (7) onto the blower tube (2) as far as lug (8), position ’a’ (long), and rotate it in direction of arrow to lock in position. BG 56, BG 66, BG 66 C, BG 86, SH56, SH 86 English / USA Assembling the Shredder Vacuum 295BA057 KN 4295BA058 KN 321 685295BA059 KN Removing the Blower Tube : Shut off the engine. : Insert a suitable tool through the hole in the union nut and press down the tab. : Rotate the union nut in direction of arrow as far as stop. : Remove the blower tube. Mounting the Elbow : Insert the elbow (1) into the catcher bag (2) as far as mark (arrow). : Tighten the strap (3) on the catcher bag and press down the tab (4). The zipper on the catcher bag must be closed to avoid the risk of injury. : Line up the arrows (5). : Push the elbow into the fan housing stub (6) as far as stop. : Push the union nut (7) over the fan housing stub and rotate it in the direction of the arrow until the tab (8) engages the hole (9) in the union nut. BG 56, BG 66, BG 66 C, BG 86, SH 56, SH 86 English / USA 295BA080 KN Assembling the Suction Tube :Line up the arrows of the suction tube and extension – push the tubes together so that they snap into position. 2295BA060 KN 1 643295BA061 KN295BA062 KN : Line up the arrows (3). : Push the suction tube into the fan housing stub (4) as far as stop. : Push the union nut (5) over the fan housing stub and rotate it in the direction of the arrow until the tab (6) engages the hole (7) in the union nut. : Continue turning the union nut in direction of arrow to tighten it down firmly. Removing the Elbow : Shut off the engine. : Insert a suitable tool through the hole in the union nut and press down the tab. : Rotate the union nut in direction of arrow as far as stop. : Remove the elbow. Mounting the...