. MF4890dw/MF4780w Alphabet (capital and smallletters) and symbols Numbers OFF Entry mode Available text <12> ON Langue Czech Danish Dutch English Use wireless LAN to connect computer? (Can config. later.) No Yes Yes No See Wireless LAN Setting Guide to perform settings. OK Connect to the computer via awireless LAN immediatelyStart from step 4 of “Setting Wireless LAN” in the Wireless LAN Setting Guide Connect to the computer via a wireless LAN laterRefer to the Wireless LAN Setting Guide. Connect to the computer via a wired LANProceed to “Connecting via a Wired LAN (MF4890dw/MF4870dn/MF4780w Only)” (P.12). Connect to the computer via a USB cableProceed to “Connecting via a USB Cable” (P.12). Do not connect to PC Finish the setup. . MF4870dn/MF4750/MF4730 Langue Czech Danish Dutch English Copy: Press Start 100% A4 Density: 0 Original Type: Text... 2-Sided: Off 1 +- 01 11 En Choosing the Method to Connect theMachine to the Computer Connecting via a Wired LAN (MF4890dw/MF4870dn/MF4780w Only) En Choosing the Method to Connect theMachine to the Computer Connecting via a Wired LAN (MF4890dw/MF4870dn/MF4780w Only) Connecting via a Wired LAN (MF4890dw/MF4870dn/MF4780w Only) See “Connecting via a Wired LAN” You can connect the machine to the computer through a wired router. Use the LAN cables to connect the machine to the wired router (access point). Make sure that there is an available port in the router to connect the machine and the computer. Have a LAN Cable of Category 5 twisted-pair cable or higher ready. . Connecting via a USB cable See “Connecting via a USB Cable” You can connect the machine to the computer using a USB cable. . Connection via a Wireless LAN (MF4890dw/MF4780w Only) See the Wireless LAN Setting Guide. You can connect the machine to the computer through a wireless router*. Since it is connected to wireless, no LAN cables are needed. * A wireless router (or access point), which supports IEEE802.11b/g/n, is required. If you do not sure whether your router is wireless or wired: See the instruction manual provided with your network device, or contact the manufacturer. 1 Connect the LAN cable. The IP address will be automatically configured in 2 minutes. If you want to set the IP address manually, see the following items. e-Manual “Network Settings” . “Basic Network Settings” . “Setting the IP Address” 2 Install the driver and software using the User Software CD-ROM. Proceed to “Setting a Paper Size and Type” (P.13). Connecting via a USB Cable Connect the USB cable after installing the MF Drivers and the MF Toolbox. 1 Install the driver and software using the User Software CD-ROM . 2 Connect the USB cable. Proceed to “Setting a Paper Size and Type” (P.13). 12 13 For details on the installation procedures: En See the MF Driver Installation Guide Setting a Paper Size and Type Follow the instructions on the screen, set the paper size and type. ..MF4890dw/MF4870dn/ MF4780w/MF4750 ..MF4730 Paper Settings MP Tray Drawer 1 1 Applying settings... Wait a moment. Specifying Initial Fax Settings and Connecting a Telephone Cable (MF4890dw/MF4870dn/MF4780w/MF4750 Only) 1 Specify the initial fax settings. Perform fax setup? Set up Now Set up Later Connect phone line. Follow illustrations on the next screen: Connect line to A. *Next : Press OK Follow the “Fax Setup Guide” to specify a fax number, a unit name, and a receive mode. For more details on the receive mode, see the e-Manual. e-Manual “Fax” . “Using the Fax Functions” . “Receiving Faxes” . “RX Mode” How to use a username When you send a document, the sender information that you registered is printed on the recipient’s paper. 2 Connect a telephone cable. .. .. Telephone line connector Telephone/Handset (Optional) When appears on the display, connect the telephone cable by referring to the illustration. When installing the optional handset: For more details, see the supplied manual with the handset. 3 Exit the Fax Setup Guide, and then restart the machine. End ...
)
