Assessments - 12, GPA: 4.3
(
)
)
|
Facilidade de uso
NOTICE: I Do not turn the main power OFF during copying. Doing so will cause a paper jam. ............................... When you finish copying, press the power switch OFF. CAUTION: . If the copier will not be used for an even longer period of time such as during consecutive holidays, unplug the power plug for safety. ............................... C Special Feature for the Copier . Auto Power-off Feature If the copier is not operated for a period of 5 minutes after copying finishes, the power turns OFF automatically. BASIC COPYING Copying onto Various Types of Copy Stock To make copies with copy stock which cannot be loaded in the cassette, such as any heavy paper or card stock, transparencies or labels, use the multi-stack bypass (PC880) or single-sheet bypass (PC860). For the PC880 1 1 Place your original on the platen glass. The side that you want to copy must face downward. Align the original between the appropriate paper size marks. CAUTION: . Close the platen glass cover gently to avoid catching your hand, as this may result in personal injury. . Do not press down hard on the platen glass cover when using the platen glass to copy thick books. This may damage the platen glass and/or result in personal injury. MEMO: . After placing the original, lower the platen glass cover. Do not copy with the platen glass cover left open; doing so will result in excessive toner consumption. ............................... 2 2 Load copy stock face up into the multi-stack bypass. (See “How to Load Copy Paper in the Multi-stack Bypass,” on p. 25.) Paper size marks Load paper up to here ............................... 3 3 Press the Paper Select key to select the multi-stack bypass. MEMO: . The indicator on the control panel will light. ............................... Press the Start ( ) key. NOTICE: . When copying onto transparencies, remove each transparency from the copy tray as it is output. . Do not make copies with paper which has already been printed on using a thermal transfer printer. Copying with it may adversely affect the quality of your copy images or cause a paper jam. If you want to copy onto it, first, make a copy of it. Then, print onto that copy. MEMO: . When making continuous copies and using the multi-stack bypass, the copy speed may be slightly slower than usual. ............................... C For the PC860 1 1 Place your original on the platen glass. The side that you want to copy must face downward. Align the original between the appropriate paper size marks. CAUTION: . Close the platen glass cover gently to avoid catching your hand, as this may result in personal injury. . Do not press down hard on the platen glass cover when using the platen glass to copy thick books. This may damage the platen glass and/or result in personal injury. MEMO: . After placing the original, lower the platen glass cover. Do not copy with the platen glass cover left open; doing so will result in excessive toner consumption. ............................... 2 2 Adjust the slide guides to fit the size of the copy stock. NOTICE: . If the slide guides are not adjusted correctly for the paper size, the inside of the copier may get dirty and the quality of your copy images may be adversely affected. Paper size marks ............................... BASIC COPYING Insert a sheet of the copy stock into the single-sheet bypass. Hold a sheet of the copy stock until it begins to feed into the copier. After the copy stock feeds into the copier, copying will begin automatically. NOTICE: . When copying onto transparencies, remove each transparency from the copy tray as it is output. . Do not make copies with paper which has already been printed on using a thermal transfer printer. Copying with it may adversely affect the quality of your copy images or cause a paper jam. If you want to copy onto it, first, make a copy of it. Then, print onto that copy. . Wait until the number on the Copy quantity/Copy ratio display turns from “1” to “0” before inserting the next sheet of copy stock. ............................... Copying onto Transparencies Place the original on the platen glass with the centre of it aligned with the mark. 1. Adjust the slide guides for the width of the transparency. 2. Load transparencies on the multi-stack bypass one at a time (PC880). Insert a transparency into the single-sheet bypass (PC860). NOTICE: . Remove each transparency from the copy tray as it is output. If Transparencies Do Not Feed Smoothly (PC880) If the copier is used in certain operating environments, in which the temperature or humidity is high, transparencies might not feed into the copier when the Start ( ) key is pressed. If this happens, follow the procedure described below. 1. Place a sheet of copy paper underneath the transparency. Position the copy paper so that it extends approximately 1 cm beyond the leading edge of the transparency. 2. Hold the rear edge of the sheets as shown and place them in the multi- stack bypass. 3. While holding ...
Este manual também é adequado para os modelos :Scanner / Copiadora / MFP - PC-880 (2 mb)