Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Sharp, Modelo AR-407

Fabricante : Sharp
Arquivo Tamanho: 4.23 mb
Arquivo Nome : AR337-005.pdf
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


The setting procedure is described below. . INTERRUPT will not function during tandem copying. . The tandem copying function is not available for the AR-287. 3-44 READY TO CO READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT TANDEM COPY ERASE COVERS IMAGE EDIT TEXT STAMP TRANSPARENCY INSERTS DUAL PAGE COPY OK AUTO EXPOSURE PAPER SELECT 100% COPY RATIO AUTO A4 1 1 Ensure that the two copiers are connected through the tandem-connection cable and they have been turned on. 2 2 On the copier that will be set as the main copier, place the originals in the document feeder tray or on the document glass. 3 3 Press the SPECIAL MODES key. . The SPECIAL MODES screen will appear. 4 4 Press the “TANDEM COPY” key on the touch panel. . The “TANDEM COPY” key will be highlighted. TANDEM COPY 5 5 Press the “OK” key. 1 2 3 4 5 6 7 8 9 0 C P CLEAR PROGRAMAUDIT CLEAR INTERRUPT TRANSPARENCY INSERTS DUAL PAGE COPY OK C CLEAR INTERRUPT CA CLEAR ALL START 6 6 Make all other desired copier settings and enter the number of copies. l The functions selected on the main copier will be used by both copiers. (1) The key operator programs of which settings at the main copier are given priority (the settings at the sub copier are disregarded): Exposure Adjustment, Toner Save Mode, Initial Margin Shift, Erase Width Adjustment, Initial Status Setting, Staple Position Setting, Date Format Setting, Date and Time Adjustment and Disabling of Covers Mode. (2) The key operator programs for which the same settings between the main and sub copiers are required: Disabling of Duplex Copying and Disabling of Stapler. (3) The key operator program that can only be set at the main copier: Disabling of Auto Paper Selection. (4) In case of the other key operator programs than mentioned above, different settings on the main and sub copiers respectively do not matter even when the tandem copying is activated. 7 7 Ensure that paper of the same size selected in the main copier is installed in the sub copier. . Paper of the same size and same orientation must be installed in the two copiers. Even if the image of the original is rotated to match the copy paper in the main copier, the orientation of the copy paper in the sub copier must be the same as that in the master copier. 8 8 On the main copier, press the START ( ) key. . Images scanned by the main copier will be stored in both copiers. Half the number of copies selected will be made simultaneously on both copiers. When the number of copies selected is odd, one more copy will be made on the main copier than the sub copier. . If the message “CHECK THE SUB MACHINE.” appears on the main machine, an error has occurred in the sub machine. Check the message on the sub machine and clear the error. . If the message “THE SYSTEM IS NOT CONFIGURED TO PERFORM TANDEM JOB. CODE: XX” appears on the main machine, refer to the tandem copy related descriptions in the TROUBLESHOOTING (see page 5-13). . To cancel a copy run after starting, press the CLEAR ALL ( CA ) key on the main copier. . To cancel the TANDEM copying, press the “TANDEM COPY” key again on the SPECIAL MODES screen of the main copier. 3-45 CHAPTER3 SPECIAL Tandem copy SETTING REVIEW SETTING REVIEW The current settings of copier functions can be displayed on the touch panel. CHAPTER3 SPECIAL FUNCTIONS Setting review 100% COPY RATIO 1 1 Press the REVIEW ( ) key. . The REVIEW screen will appear. The settings of the duplex mode (1-sided to 1-sided, etc.), sort/ group mode, and special functions will be displayed. The exposure, paper size, and copy ratio which are displayed on the basic screen will not be displayed on the REVIEW screen. Example EXIT 1-SIDED COPIES OF 1-SIDED ORIGINALS STAPLE SORT MARGIN SHIFT : REVIEW SIDE 1 SIDE 2 10 mm 10 mm 2inl NO BORDER Confidential 1ST PAGE ONLY MULTI SHOT : SELECT STAMP : 1/2 3-46 IDED COPIES OF 1-SIDED GINALS PLE SORT HIFT :SIDE 1 SIDE 2 10 mm 10 mm 2inl NO BORDER Confidential 1ST PAGE ONLY OT : TAMP : 1/2 ED COPIES OF 1-SIDED NALS EXIT 1/2E SORT FT :SIDE 1 SIDE 2 10 mm 10 mm 2inl NO BORDER Confidential : MP 2 2 To review all setting information, it may be necessary to scroll between review screens. To scroll between screens, use the or key. 3 3 To exit the review screen, press the “EXIT” key. . The basic screen will appear again. CHAPTER 4 SUPPLIES This chapter describes the supplies for this copier such as paper and toner. Page . lllll PAPER ......................................... 4-2 Types and sizes of copy paper ......................... 4-2 Loading copy paper ................................ 4-2 . lllll ADDING TONER .................................. 4-5 . lllll USED TONER DISPOSAL ........................... 4-7 . lllll STORAGE OF SUPPLIES ........................... 4-8 CHAPTER4 4-1 CHAPTER4 SUPPLIES Paper PAPER Types and sizes of copy paper Size Weight Capacity (80 g/m2 (21lb.) paper) Special paper Paper trays 1 and 2 A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") 56 to 105 g/m2 (15 lbs. to 28 lbs.) 500 sheets Bypass tra...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias