Assessments - 3, GPA: 4 ( )

Fabricante : Cannon Arquivo Tamanho: 143.8 kb Arquivo Nome : Língua de Ensino:

Available in 6, 12, 18, 24, and 36 inch lengths. Mounting to Cannon Deck Mount The Cannon Deck Mount works great for adding stability and easy removal of your pedestal mount. With your Cannon Deck Mount installed on your boat, attach your pedestal mount by removing the thumb screws and fastening the pedestal base to the plate with four 1/4”-20 x 3/8” long flat head screws. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the hard mounting of Cannon Dual Axis Rod Holders. The plate comes with a black protective mounting boot and all mounting hardware. Mounting Your Downrigger to the Pedestal Mount The Cannon Pedestal Mount provides 1/4”-20 tapped mounting holes for attaching most downrigger mounting bases. To attach a mounting base you will need four 1/4”-20 screws (not included). To determine the length of screws needed, measure the thickness of the downrigger mounting base and add 1/2”. See below for screw lengths for the Cannon Downrigger mounting bases. Magnum / Digi-Troll Tall Mounting Base — 2” Long Truss Head screw Uni-Troll Low-profile Mounting Base — 1” Long Truss Head screw Easi-Troll / Lake-Troll Tab-Lock Base — 3/4” Long Truss Head screw Pedestal Mount \ Accessory Compatibility Mounts Pedestal Track Mount Gimbal Track Mount Pedestal Track Mount Rail Mount Clam p Mount Deck Mount 4" Fixed Mount . 0 0 0 0 . 6" Fixed Mount . 0 0 0 0 . 4" Sw ivel Mount . 0 0 0 0 . 6" Sw ivel Mount . 0 0 0 0 . . - Compatible 0 - Not Compatible Troubleshooting - Swivel Pedestal Problem: Pedestal will not rotate when the lock pin is disengaged. Make sure the downrigger line is all the way up. Any load on the downrigger or pedestal may prevent the pin from disengaging. Spray a lubricant into the slot which the lock pin slides. Make sure lock pin moves freely up / down. Problem: Pedestal rotates while in locked position under normal use. The break away bolts are not tight enough. Re-torque bolts to 25 ft-lb. NOTE: Bolts may have to be tightened higher than 25 ft. lbs under some conditions. Do not exceed 35 ft-lb as this may damage the top plate. Problem: Pedestal did not breakaway while locked when the boom struck an object. The break away bolts are over-tightened. Loosen bolts and re-torque to 25 ft. lbs. Replacement Parts Part Part Number Description USED ON 3393413 THUMB SCREW 1904030, 1904031, 1904032, 1904033 CANNON® LIMITED WARRANTY Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be returned, prepaid and with proof of the date of purchase to the following: . Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001 This limited warranty may be e...

Baixe o seu

Para fazer o download, introduza 2 dígitos :