Assessments - 3, GPA: 4.3 ( )

Fabricante : Cannon Arquivo Tamanho: 1.44 mb Arquivo Nome : Língua de Ensino:

1904020 Clamp Mount Cannon Rail Mounts allow for the mounting of Cannon single and dual axis rod holders to any transom or allowable clamping edge. Clamp opens to two and a half inches and is made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904000 Deck Mount The Cannon Deck Mount plate is a four inch by three inch clear anodized aluminum plate which allows the hard mounting of Cannon Dual Axis Rod Holders. The plate comes with a black protective mounting boot and all mounting hardware. 1904025 Aluminum Mounting Track 6” 1904026 Aluminum Mounting Track 12” 1904027 Aluminum Mounting Track 18” 1904028 Aluminum Mounting Track 24” 1904029 Aluminum Mounting Track 36” Cannon tracks allow for flexible mounting positions and easy removal of Cannon’s track system accessories. Locking grooves allow thumb screws to index with track and prevent accessories from twisting. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. All mounting hardware included. Available in 6, 12, 18, 24, and 36 inch lengths. 1904005 Pedestal Mount Track 12” 1904006 Pedestal Mount Track 18” The pedestal mounting track is three inches high and allows for mounting of Cannon’s track system accessories. Pedestal can be surface mounted or slid into mounting track for a variety of mounting positions and easy removal. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resis tance. Mounting hardware is included. Pedestal is available in twelve and eighteen inch track lengths for mounting up to three track system rod holders. 1904010 Gimbal Mount Track – Side Gunnel 1904011 Gimbal Mount Track – Stern Cannon’s Gimbal Mount Track allow for mounting of Cannon’s track system accessories in flush mount rod holders. Thirty degree angled gimbals have twelve inch tube length with an outer diameter of 1-1/2 inches. Eighteen inches of track allow for mounting up to three track system rod holders. The system is compatible with Cannon, Bert’s, and Traxtech track system products. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resistance. 1904030 Fixed Base Downrigger Pedestal 4” 1904031 Fixed Base Downrigger Pedestal 6” Cannon’s fixed base downrigger pedestals CAUTION: can be surface mounted or track mounted for a vari The Cannon Pedestal Mount is intended for ety of mounting positions and easy removal. The use with a Track that is 3/4” thick aluminum top plate is pre-drilled and mounted directly to the tapped for mounting Cannon downriggers as well as deck of the boat ONLY. most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker downriggers. Components are made from clear anodized aluminum and stainless steel for strength and corrosion resi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :