Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
• The appliance contains sharp parts -keep out of the reach of children. • Use only accessories supplied with the appliance or those recommended by the manufacturer. Use • Always place the appliance on a dry, level and firm surface well away from any edges. • Only turn on the appliance when: o the blender glass with lid has been attached and contains liquid and/or food, or o when the centrifuge bowl, base, lid and fruit pulp holder are attached and the locking mechanism is locked in a vertical position on the lid. • Do not leave the appliance running nonstop for more than 2 minutes at a time. If the appliance has been running for 2 minutes, allow it to cool down for 2 minutes before you use it again. • Do not use the appliance if the centrifuge bowl is damaged or the lid is cracked or damaged in any way. • NEVER use your fingers, kitchen utensils or similar to push ingredients down the feed tube! Use the accompanying tamper. • NEVER stick fingers or other objects in the spout. • NEVER touch the moving parts of the appliance until it has come to a complete stop. • Never pour boiling liquid or very hot food into the blender glass. Make sure that the food has a sufficiently low temperature to avoid burning/scalding in case of skin contact. • Never add liquid or other food above the “MAX 1 00 ml” mark on the blender glass. • Do not use the blender glass if it is cracked or damaged in any way. • Never put tools or your hands into the blender glass while the appliance is switched on. Please note that the blade may still rotate for a while after you switch the appliance off. • Be careful not to touch the sharp edges of the blades during use and cleaning! Cord and plug • Do not let the cord hang out over the edge of the work surface. • Check that it is not possible to pull or trip over the cord or any extension cord. • Keep the cord and appliance away from heat sources, hot objects and naked flames. • Remove the plug from the socket before removing the lid from the appliance, before cleaning, or when the appliance is not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug. • Ensure that the cord is fully extended. • The cord must not be twisted or wound around the appliance. • Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way. • If the appliance, cord or plug have been damaged, have them inspected and if necessary repaired by an authorised repair engineer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee. KEY TO MAIN COMPONENTS OF THE APPLIANCE 1. Tamper 2. Fruit pulp holder . Drive shaft 4. Motor section 5. Spout cover 6. Locking mechanism 7. Blender glass lid 8. Cap 9. Blender glass with scale 10. Blade 11. Spout 12. Base 1 . On/off button 14. Centrifuge bowl 15. Container for skimming of juice 16. Funnel 17. Juice extractor lid PRIOR TO FIRST USE Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food. USING THE APPLIANCE Preparing the juice extractor 1. Place the motor section (4) on a level surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suction cups underneath. 2. Attach the fruit pulp holder (2) by inserting the tab on the holder into the hole on the one side of the motor section. Press until you hear a click. . Place the base (12) on the motor section with the spout (11) facing the side where the fruit pulp holder is attached. 4. Carefully lock the centrifuge bowl (14) onto the base. o Be careful not to touch the sharp parts in the bottom of the centrifuge bowl. o Press the centrifuge bowl into the base as far as it goes and you hear a click. o Make sure that the centrifuge bowl doesn't sit too loosely on the base and that it rotates evenly. 5. Place the juice extractor lid (17) on the appliance so that it covers both the fruit pulp holder and the base with the centrifuge bowl. Make sure the lid is not askew. 6. Pull the locking mechanism (6) into vertical position and press it into position over the tabs on the lid until the lid locks into place. The lock mechanism makes a clicking sound when this is done correctly. 7. Fit the cap (5) over the funnel by holding it against the side of the appliance with the small end facing upwards and press until it clicks into place. 8. Place a glass, bowl or other suitable container under the spout. 9. If required, use the supplied container for skimming of juice (15). This container has a dividing plate that separates the foam from the juice when you pour the juice into a glass. 10. The appliance is now ready for use. Using the juice extractor 1. Plug in and switch on the power. 2. Switch on the appliance by turning the on/off button (1 ) to "I". . Feed the selected frui...