Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Keep this guide handy for future reference. English Page 02 Arabic Page 11 PRJE600 IMPORTANTSAFEGUARDSEnglishIMPORTANTSAFEGUARDSEnglish While using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury to persons, basic safety precautions should be followed, including the following: • Read all instructions carefully, even if you are familiar with the appliance. • To protect against the risk of electric shock, DO NOT IMMERSE the appliance, cord set or plug in water or other liquids. • To clean, wipe the exterior with a damp cloth. • Close supervision is necessary when any appliance is used near children. Never leave an appliance unattended when in use. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. • Switch off and remove the plug from the power outlet when not in use before assembling or disassembling parts, cleaning or carrying out any maintenance of assembling or disassembling parts, cleaning out any maintenance of the appliance. Never pull the cord while unplugging out from power outlet. • Do not operate any appliance with a damaged in any manner. Return the complete appliance to your nearest authorized service facility for examination, electrical repair, mechanical repair or adjustments to avoid any hazard. • The use of attachments or accessories not recommended or sold by this appliance manufacturer may result in fire, electric shock or personal injury. • Do not let the cord hang over the edge of a table, counter, or touch hot surfaces. • Avoid touching hot surfaces, use handles and knobs. • Do not operate or place any part of this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven). • Do not abuse the cord. Never carry the appliance by the cord or yank it to disconnect it from the outlet; instead, grasp the plug and pull to disconnect. • When using an extension cord with your appliance, make sure the extension cord is correctly wired, and rated for its use. • This product is intended for household use only. • Do not attempt to repair the appliance yourself; instead, take it to your Black & Decker-owned or Authorized Service Centre for repair. SAVETHESEINSTRUCTIONS -2 English 6 3 2 1 15 13 PartsIdentification1 Motor housing 2 Latch – left 3 Latch – right 4 Sieve housing 5 Pulp container 6 Spout 7 Cover 8 Inlet chute 9 Pusher 10 Pusher (round) 11 Inlet chute adaptor 12 Sieve 13 Plug & cord set 14 Sieve adaptor 15 Switch 14 4 5 7 12 11 11 9 Note: The Juicer will not operate unless all the parts (pulp container (5), sieve housing (12), latches (2,3) and cover (7)) are correctly fitted. Note: The sieve will continue to rotate after the appliance has been turned off. Note: Do not approach any parts that move in use. Allow the motor to come to a complete stop before removing any part of the appliance. FEATURES • 600W • 2 speed operation • Removable pulp container • Full apple inlet • Stainless steel sieve -3 English Fig A -Before first use: Before using your Juicer for the first time, make sure it is disconnected from the electrical supply, then remove all packaging from the sieve & pulp container. To remove the packaging, open the right- hand latch (7), then the left-hand latch (8). Lift the cover (5) from the appliance. Remove the packing from the sieve (12) and the pusher from the pulp container (3). Pull the sieve housing & sieve from the Juicer. All parts must be cleaned as recommended in the section “How to take care of your Juicer”. The motor housing must only be cleaned with a damp cloth, and dried thoroughly before use. Inspect the sieve for signs of damage. Note: Do not use the appliance if the rotating sieve is damaged. Fig B -How to assemble your Centrifugal Juicer Place the sieve housing (13) on the motor housing (1), then place the sieve (12) into the sieve housing, pressing it onto the sieve adaptor (14). must then be gently pushed down and rotated in an anti-clockwise direction until it locks in place. A separate pusher (9) is provided for use with the adaptor. Warning: Never use the pusher (9) without the adaptor in place as damage may occur. To process round ingredients remove the adaptor by rotating it in a clock-wise direction then lift it from the inlet (8). The pusher is used by first aligning the groove with the rib in the inlet the pushing it down gently. How to use your Juicer This appliance is designed to extract juice from fruits & vegetables. Do not use this appliance for any other purpose. For indoor domestic use only. Prepare material to be processed by washing thoroughly and peeling as required. Remove all pips and large seeds. Large items may need to be cut into pieces to fit the inlet chute (8). Smaller items may be placed directly into the chute (8) and guided into the Juicer using the relevant pusher (9). Make sure the speed switch (2) is in the ‘’0’’ (OFF) position, then plug the cord-set into ...