Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
0 Press * to display the function menu. 0 Press ► to move the cursor to Q. 0 Press * to confirm the delete request. O Press * to delete the message. Repeat these steps to delete each message. Setting Auto On/Off To set your message receiver’s auto on/off feature, proceed as follows: O Press * to display the function menu. O Press to move the cursor to 3. © Press * to display the auto on/off screen. When the screen is first displayed, the cursor is at the farthest left position. The enabled (3) or disabled (3) symbol indicates the current status. Example of Auto On/Off Screen 0 Press i or y to select 3 or J. 0 Press ► to move the cursor to the hour digit. The Auto On time is displayed on the left and the Auto Off time is displayed on the right. 0 Press A or f to adjust the hour. 13 O Repeat the process for each set of digits for both the on time and the off time (hour, minute, AM/PM if your message receiver is set to display time in the 12 hour mode). © Press * to activate auto on/off. The symbol 3 is displayed if the auto on/off function is enabled. If the on time is equal to the off time, the message receiver does not enable the auto on/off function. Other Features Battery Gauge: The battery gauge indicator is located on the status screen and keeps you informed of the battery energy level. The five indicators range from full to low: ^ (full), ^ (3/4), ^ (1/2), ^ (1/4), and F F (low). Key Click: When this feature is enabled, and the message receiver is in the audible mode, a “click” is emitted whenever a button is pressed. The click is not heard when the message receiver is in the silent mode. Duplicate Message: If the same message is received more than once, DUPLICATE MESSAGE is displayed at the beginning of the new message. The new message contains the latest time stamp. 14 Out of Range: With this option enabled, T T is displayed whenever you are out of range of the paging transmitter. Your message receiver can also alert you of this if this feature is enabled. The symbol is no longer displayed when you return to your transmitting area. Errored Data Indicator: The symbol g is displayed when potentially corrupt data is received. The indicator alternates with the corrupted character. Alphanumeric and Long Numeric Missing Fragment Indicators: If part of the message has not been received <...> or_is displayed. NOTE: Applicable to SCRIPTOR FLX4 only. Maildrop History: When this option is enabled, the message receiver stores four history files per maildrop (information services) slot selected. When a message is received on a specific slot, the existing message is “pushed” into the history area. When a fifth history file is received, the oldest history file is deleted. 15 Battery Information Your message receiver is designed to operate with a single AA-size alkaline battery (carbon zinc batteries are not recommended). See the diagram for the battery door location. To install or replace the battery, place the message receiver face down and proceed as follows: O Unlock the battery door by sliding the door latch away from the battery door. O Slide the battery door in the direction of the arrow (toward the outer edge). © Lift the battery door away from the housing to remove it. Lift the battery out of the battery compartment, taking note of the positive (+) and negative (-) markings on the battery and the message receiver housing. SCRIPTORLX4/FLX4 Message Receiver Battery Replacement (rear view) To install a new battery, reverse this procedure, taking note of the positive (+) and negative (-) markings. CAUTION: Do not insert the battery backwards or the messages stored or locked in memory will be erased. 16 Care of Your Message Receiver To maintain the fine optical quality of the display in the message receiver, you should not subject the message receiver to extreme temperatures and moisture. Cleaning Your Message Receiver To clean smudges and grime from the exterior of the housing, use a soft, nonabrasive cloth moistened in a mild soap and water solution. Rinse the surface using a second cloth moistened in clean water. Do not immerse the message receiver in water. Do not use any other solutions. Repair and Maintenance Your message receiver, properly handled, is capable of many years of trouble-free service. However, if your message receiver ever requires service, Motorola’s Service Organization, staffed with specially trained technicians, offers conveniently located repair and maintenance facilities throughout the world. Please contact your paging service representative or a Motorola sales office for more information. Patent Information This Motorola product is manufactured under one or more Motorola U.S. Patents. A listing of these patents is provided inside the battery door. Other U.S. Patents covering this product are pending. 17 t, Motorola, SCRIPTOR, and §H| are trademarks or registered trademarks of Motorola, Inc. © 1996 by Motorola, Inc. All Rights Reserved. P...
Este manual também é adequado para os modelos :Celulares - FLX4 (439.82 kb)