Assessments - 5, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
IDA requires that the safety provisions contained in Appendix 1 is prominently reflected in the user instructions supplied with GSM mobile equipment. AMENDMENT AND DECISION IDA may change the specification without prior notice in order to keep pace with the continuous improvement in standard development. In cases of doubt with regard to the interpretation of type approval specification, the method of carrying out the tests and the validity of the statements made by the manufacturers of the equipment, the decision of IDA shall be final. SUMMARY OF USER AND THIRD PARTY SAFETY REQUIREMENTS GSM MoU doc. : TP.03 provides advisory and cautionary instructions to users of GSM mobile equipment regarding their own and third party safety. IDA requires the following instructions or its equivalent to be included in all user handbooks for GSM mobile equipment. Accessing For Your Safety Accessing the Menu Electrical Safety Where provision is made for the connection of any class of mobile equipment to power supply units or battery chargers using voltages in excess of 50Vac or 75Vdc, user handbooks for mobile equipment shall specify the power supply unit(s) or battery charger(s) approved for use with the mobile station and shall include the following statement : “This apparatus is intended for use when supplied with power from (identification of battery charger(s) and/ or power supply unit(s). Other usage will invalidate any approval given to this apparatus and may be dangerous”. Aircraft Safety User handbooks for transportable and handportable equipment shall include the following : Switch off your cellular telephone when in an aircraft. The use of cellular telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both. Explosive Atmospheres User handbooks for all classes of mobile equipment shall include the following: • Users are advised not to use the equipment when at a refuelling point. • Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Road Safety Mobile equipment may not use an ‘Alert’ device to cause a vehicle horn to sound or lights to flash on receipt of a call on public roads. • No installation instructions may show how to make such a connection and the use of terms such as ‘horn relay’ are not accepted. Reference may be made to a port enabling other apparatus to be controlled. • User handbooks offering an ‘Alert’ facility are required to contain the following text : “The use of the Alert device to operate a vehicle’s lights or horn on public roads is not permitted”. It is advised that hand-held microphone or telephone handset should not be used by the driver while the vehicle is moving, except in an emergency. Speak only into a fixed, neck slung or clippedon microphone when it would not distract your attention from the road. Non-Ionising Radiation User handbooks for mobile equipment shall draw attention to the following, in the case of Class 1 transmitted output power (1W) for GSM 1800 or Class 2 transmitted output power (8W) for GSM 900 equipment: As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Installation instructions for vehicle mounted equipment shall include, for Class 1 transmitted output power (1W) for GSM 1800 and Class 2 transmitted output power (8W) for GSM 900 equipment: • The radio equipment shall be connected to the antenna via a non-radiating cable (e.g. coaxial cables). • The antenna shall be mounted in a position such that no part of the human body will normally rest too close to any part of the antenna unless there is an intervening metallic screen, for example, the metallic roof. Accessing For Your Safety Radio wave exposure and Specific Absorption Rate (SAR) information This mobile phone model has been designed to comply with applicable safety requirement for exposure to radio waves. These requirements are based on scientific guidelines that include safety margins designed to assure this safety of all persons, regardless of age and health. • The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standardized methods with the phone transmitting at its highest certified power level in all used frequency bands. • While there may be differences between the SAR levels of various phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. • SAR data information for residents in countries/regions that have adopted the SAR limit recommended...