Caution! • Do not force the connector as this may damage the phone and/or the travel adapter. • Installing the battery pack charger vertically to wall power outlet. • If you use the battery pack charger out of your own country, use an attachment plug adapter for the proper configuration. • Do not remove your battery or the SIM card while charging. WARNING! • Unplug the power cord and charger during lightning storms to avoid electric shock or fire. • Make sure that no sharp-edged items such as animal teeth, nails, come into contact with the battery. There is a risk of this causing a fire. • Do not place or answer calls while charging the phone as it may short- circuit the phone and/or cause electric shock or fire. Disconnecting the adapter 1. When charging is finished, the moving bars of the battery icon stop and ‘Battery Full unplug the charger’ is displayed on the screen. . Unplug the adapter from the power outlet. Disconnect the adapter from the phone by pressing the tabs on both sides of the connector and Getting started pull the connector out. 1 KF300_UAE_E_1.0_0731_.................in21 21 2008.7.31 5:54:31 PM Getting started Getting started Note v Ensure the battery is fully charged before using the phone for the first time. v Do not remove the battery or SIM card while charging. v In the case the battery is not properly charged, please turn the phone off and on using the power key, then recharge the battery. After detaching and reattaching the battery, please recharge the battery. How to use a microSD memory card < How to installing a microSD memory card> 1. Turn the phone off. Inserting or removing the memory card when the phone is on may damage the files stored in the memory card. . Open the slot protection. 3. Installing the memory card into the slot. The gold contacts must be kept on the back of the microSD memory card. If the memory card doesn’t go into the slot easily, you may be trying to installing it in the wrong way or there could be a foreign object in the slot. KF300_UAE_E_1.0_0731_.................in22 22 2008.7.31 5:54:33 PM 4. Close the slot protection. 5. To remove the memory card, turn the phone off. Open the slot protection and carefully extract the memory card. Note v Avoid using the memory card when the battery is low. v When writing to the card, wait for the operation to complete before removing the card. v The card is designed to fit easily into the system one way only. Note v Do not bend the card or force it into the slot. v Do not insert any memory cards other than those made by microSD. v If the microSD has been formatted using FAT3 , format the microSD using FAT16 again. v After you insert microSD card into your phone, please check the icon area on your screen. v If the memory error icon is displayed, your memory card is not formated or is unsuppported by the phone. v In this case, you have to try to format your memory card. v If the memory error icon is still displayed on icon area , please contact service center. For more information on the microSD, please refer to the memory card instruction manual. Getting started 3 KF300_UAE_E_1.0_0731_.................in23 23 2008.7.31 5:54:33 PM Getting started Getting started Memory card formatting Before you start to use the memory card you have to format it. After you insert the memory card, select Menu o Settings o Memory status o External memory, then press the OK key. This operation should only be done when you insert the memory card for the first time. During formatting various folders will be created for different data types. Turning your handset on Ensure that your SIM card is in your handset and the battery is charged. Press and hold the end key until the power comes on. Enter the SIM PIN code that was supplied with your SIM card if the PIN code request is set to On. After a few seconds you will be registered on the network. 4 Turning your handset off Press and hold the end key until the power goes off. There may be a few seconds delay while the handset powers down. Do not turn the handset on again during this time. Access Codes You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes (except PUK and PUK codes) can be changed by using Change codes feature of Settings menu. PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorized use. The PIN code is usually supplied with the SIM card. When the PIN code request is set to Enable, your phone will request the PIN code every time the phone is switched on. When the PIN code request is set to Disable, your phone KF300_UAE_E_1.0_0731_.................in24 24 2008.7.31 5:54:33 PM connects to the network directly without the PIN code. PIN2 code (4 to 8 digits) The PIN code, supplied with some SIM cards, is required to access functions such as advice of Call costs and Fixed dial number. These functions are only available if supported by your SIM card. ...
)
