Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
There are three ways to make a call: Simply enter the phone number using the number keys across the top of the keyboard. 1. Use the search field: Chapter 4 - Telephone The number will be written to the search field. Press Call. or 2. Use the telephone directory: The Tel. application main view shows the telephone directory (Figure 4-2) whenever a call is not in progress. Contact cards that do not contain any phone numbers appear dimmed and cannot be selected. (Phone numbers can be added to contact cards in the Contacts application.) Choose a contact in the telephone directory, either by scrolling or by searching (type text in the search field), and press Call. If the contact has more than one phone number, a pop-up box listing all phone numbers will open. Choose a number from the list and press Call. or 3. Use the recent calls list: • Press the Recent calls command. • Select one of the recent calls lists (dialed, received or missed calls) and press Open. • Select a number from the list and press Call. Once you have made the call, you can now close the cover and continue the call using the phone interface, unless you want to use the handsfree mode. Note: When you open one of the lists and select a contact, Copy number copies the phone number to a clipboard where it can be copied to documents by pressing Ctrl+V. If you press Clear all lists in the recent calls view, all the information in the lists is deleted. This action cannot be undone. Answering a call When you receive a call, a note about the incoming call will be shown on the screen. If you already have a contact card for the person calling you (as in Figure 4-3), that caller will be identified by his/ her name (if supported by the network). There are two ways to answer a call: 1. Press Answer in the note that appears when you receive an incoming call. or 2. Close the device cover and answer the call via the phone interface (by pressing ). Note that you cannot have two active calls at the same time: the previous active call is automatically put on hold when you answer a waiting call (the network service “Call waiting” must be activated). If you do not want to take the voice call, press End call. The caller will then hear a “line busy” tone. Calling card call A phone calling card is a credit or debit card especially for phone charges. The calling card service you subscribe to is most often separate from your mobile phone service. A calling card may be especially useful when making long distance calls while traveling, to benefit from the discounted rates offered by certain calling card companies. . Figure 4-2: Telephone directory To make a call with a calling card: • Select a contact from the Telephone directory. • Press Call and hold the button down for more than three seconds until the command changes into Calling card call. • When you release the button, wait for a tone and then press OK. You can also make a calling card call from the phone interface by pressing and holding for more than 3 seconds. After the tone, press OK and proceed normally. Managing calls When you have made a call, information about the call is shown on the display within a frame (see Figure 4-3). In addition to a call in progress, it is possible to have both a call on hold and a call waiting to be answered. A conference call, which can contain up to five remote participants, is handled as a single call. To switch between multiple calls, use the scroll or arrow keys. The command buttons change according to the selected call’s status. Press Activate to change the held call into an active call. Call information may include the following: • Caller ID: the name or phone number of the caller (if available). • Call status: ACTIVE — A connection has been established and a call is in progress. ON HOLD — A connection has been established and you have placed the active call on hold. WAITING — Someone is trying to call you but the connection has not been established (i.e., the caller hears a ringing tone). AUDIO OFF — The speakerphone audio is set to Off. Although the cover is open, the speakerphone does not activate. Making a call • Call timer: displays time expired since the beginning of the call and also counts time spent on hold. • Call cost counter: shows the cumulative cost of the call (if this network service is available and the call cost setting is on). Call costs are calculated according to the currency or charging units set in the phone interface (see Chapter 13 "Phone interface: Detailed menus list - Duration and cost (Menu 6)" on page 13-12). To end a call, select the call you want to end and press End call. Making a new call during an active call You have the option of making another call while you have call in progress. To make a new call during an active call: Press New call and make the new call normally. To cancel the new call, press Cancel. If you have an active call and a call on hold, you cannot make new calls before either dropping a call or merging them into a conference...