Log:
Assessments - , GPA: ( )

Instruções de Operação Philips, Modelo SDV2750/27

Fabricante : Philips
Arquivo Tamanho: 1.07 mb
Arquivo Nome : d8c16aaa-403c-4761-892a-569de0d66cd6.pdf

Língua de Ensino: enesfr

O documento está colocado, por favor, espere
O documento está colocado, por favor, espere

Facilidade de uso


Your indoor television antenna 3 2.1 Product overview 3 3. Getting Started 3 3.1 Installation 3 3.2 Connect to your TV 4 3.3 Using with an external antenna or other video source 4 4. Using your television antenna 5 4.1 Adjusting Low-High amplifier level 4.2 For VHF/FM reception 5 4.3 For UHF reception 5 4.4 Setting up a digital tuner 5 with this antenna 5. Frequently asked questions 6 6. Warranty and service 6 Take time to read this manual before you use your Philips indoor television antenna. It contains important information and notes regarding installation and set up. © 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please inform yourself about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Take the package to your local recycling center. 2 2750_27.indb 2 5/7/08 10:32:39 AM 2 Your indoor television antenna Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at 2.1 Product overview A VHF antenna B UHF antenna C VHF/UHF gain control knobs D Power indicator E 12 V DC connection F A/B switch G In from video/Ant H Out to TV connection I 120V AC/12V DC power adaptor, included J Low – High Amplifier switch K Power on/off switch A B JK 3 Getting Started STOP Before you start: For this antenna to work properly, you must access the menu on the television you are connecting this antenna to (consult your television owner’s manual) then set it to receive the signal from an ANTENNA or OFF AIR instead of CABLE or SATELLITE. 3.1 Installation Determining Signal Strength Before installation determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, the antenna should be facing towards transmitter. I ENGLISH EFGH CD 3 2750_27.indb 3 5/7/08 10:32:40 AM E Tip Where possible, choose a location near a window which will give the antenna a clear view of the transmitter. E Tip Do not place the antenna on a metal surface. 3.2 Connect to yourTV 1 Connect one end of the coaxial cable to signal output of the antenna and the other end to the input on your TV receiver. 2 Connect DC plug to the antenna and the power supply to a 120V AC outlet. 3 Turn the switch ON located on the side of the antenna base. 1 2 2 1 3 3.3 Using with and external antenna or other video source Your antenna is equipped with a mode selector switch (A/B switch) that allows you to have more than one video source. To use your SDV2750/27 as an internal amplified TV antenna simply slide the switch to ANT position. To use an external antenna or other video source simply slide the switch to VIDEO position. If you are using the antenna with the switch in the VIDEO position, make sure that your external antenna or other video source is connected to the VIDEO input located on the back of the antenna. 3 4 2750_27.indb 4 5/7/08 10:32:43 AM ENGLISH 4 Using your indoor television antenna 4.1 Adjusting Low-High amplifier level 1 Turn the amplifier “ON/OFF” switch on the antenna to the “ON” position. 4 2 Set the Low-High amplifier level switch according to your location. 5 For locations that are relatively close to local TV transmitters (less than 10-15 miles) set the switch to the ”L” position. For locations that are further away from local TV broadcast transmitters (more than 15 miles) set the switch to the “H” position. 4.1 For VHF/FM reception 1 Extend the telescoping dipoles to the longest possible length. 6 2 Turn your TV or FM radio to the desired channel/station. Adjust the dipoles by moving in different directions up and down, until reception is achieved. 7 3 Turn on the amplifier by rotating the VHF gain control knob towards the max position until reception is improved. 8 D Note If you are unsure of the distance from the local TV broadcast transmitters to your location, visit where you can enter your address and obtain local map that will provide this information. D Note Depending on your location and surroundings, you may obtain the best possible reception with the amplifiers turned to the minimum level. 6 7 8 4 5 2750_27.indb 5 5/7/08 10:32:46 AM 4.2 For UHF reception 1 Turn your TV to the desired channel. 2 Turn on the amplifier by rotating the UHF gain control knob towards the max position until reception is improved. 9 D Note You may ne...

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias