Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
The complete range is generally divided into two bands: Low Band: 10,70 - 11,80 GHz; LOF 9750 MHz High Band 11,70 - 12,75 GHz ; LOF 10600 MHz Viaccess Digital encryption standard 9 Technical Data DBS-Tuner: Input frequency range 950 .... 2150 MHz Input level range - 60 dBm ... - 25 dBm DBS-Tuner Input F - Buchse Input impedance 75 Ohm AFC capture range +/- 3 MHz Demodulation Shaped QPSK Symbo lrate 15 ... 30 Mbaud/s, MCPC FEC Viterbi and Reed-Solomon Viterbi rates 1/2, 2/3, 3/4, 5/6, 7/8, automatic adjustment Roll-off Factor 35 % Demultiplexing: in accordance with ISO 13818-1 Video decoding: Video compression MPEG-2 and MPEG-1 compatible Up to MP@ML (main profile @ main level) Video standard PAL / 25 Hz Active image area 720 Pixel x 576 lines Image formatt 4 : 3 / 16 : 9 Image material 16:9 Automatic adjustment for 16:9 TV sets (via SCART) Letterbox Filterung for 4:3 TV sets Audio decoding: Audio compression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 33 bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 34 Memory capacity: FLASH memory 0,5Mbytes SDRAM (CPU) 2 MBytes SDRAM (CPU) 2 MBytes EEPROM 1 kByte Audio Parameters: Input analogue: Input levels L/R 0,5 V r.m.s. (nominal) Input impedance > 40 kOhm Output analogue: Output levelsl L/R 0,5 V r.m.s. (nominal) Output impedance 600 Ohm THD > 60 dB (1 kHz) Crossover < - 65 dB Initial volume Memorizes last set value Video Parameters: Input: Input level FBAS 1 Vs-s +/- 0.3 dB into 1 kOhm Input level RED 0,7 Vs-s +/- 0.1Vp-p into 75 Ohm Input level GREEN 0,7 Vs-s +/- 0.1Vp-p into 75 Ohm Input level BLUE 0,7 Vs-s +/- 0.1Vp-p into 75 Ohm Video/Tele text Tele text filtering corresponding to ETS 300 472 standard Reading in tele text files (FBAS) corresponding to ITU-R BT.653-2 lines: 6-22 and 320-335 TV-SCART: Output: switchable FBAS or RGB r VCR-SCART: Eingang: FBAS oder RGB Output: FBAS Serial Interface RS 232: Type RS 232, bi-directional Bitrate 38,4 kBit/s Connecting plug D-SUB 9 pin plug Function Updating of operational software LNB Power supply: LNB current 400 mA max.; double insulated LNB voltage vertical <14,0V no load, > 11,5 V at 400 mA LNB voltage horizontal < 20V no load, > 17,2 V at 400 mA LNB switched off in standby mode 22 kHz-Modulation: 22 kHz, amplitude 0.6 V +/- 0.2 V Programme memory/Satellite positions: 500 TV programmes 500 RADIO programmes 34 bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 35 Number of active satellite positions: max.4 (DiSEqC 1.0, SAT POSITION / SAT OPTION) EPG Data: EPG preview Timer: 32 events, up to 1 year ahead OSD Languages: German, English Remote control system: RC-5 Modulation frequency 36 kHz Infrared wavelength 950 nm Power supply: Power supply switch: Power consumption: < 11,5 W (in operation, horizontal polarisation / 400 mA LNB current < 9,5 W (in operation, without LNB) < 8,3 W (Standby mode) Input voltage: 180 V.... 250 V / 47...63 Hz alternate current General: Ambient temperature +15°C...+35°C Humidity < 80% Dimensions(WxDxH): 305 mm x 135 mm x 65 mm Weight/mass: 0,8 kg 35 bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 36 10 Troubleshooting Guide Problem No picture, no sound, LED not lighted No picture, no sound, LED on Temporary square blocks in picture, temporary freeze in picture, no sound, screen temporarily black, shows information “no signal”. Sound OK, blue screen Sound OK, no picture No reception of signals previously received Remote control not working Various programmes not shown in programme list Programmes such as Pro /, Sat 1, TM 3, Kabel 1, DSF and HOT temporarily not available Unit not responding Possible cause No mains current Short circuit in LNB connection Defective or missing cable connection Defective LNB Wrong external unit set on receiver Antenna incorrectly aligned Strong rain or snow conditions Antenna incorrectly aligned Dish size may be too small for location Object blocking line of sight between satellite and dish (e.g. tree) Radio mode on Scart plug not properly inserted in Scart socket Antenna alignment out or defective Programme is being broadcast on another transponder Programme is no longer being broadcast Batteries are spent Wrong programme list selected Interference from DECT telephones Defective data stream - unit blocked Solution Check mains plug and cable Switch unit off, repair short-circuit, switch unit on again Check all cable connections Replace LNB Adjust setting (see Point 5.4) Adjust antenna Remove snow from antenna Adjust antenna position Use larger antenna dish Mount dish differently to ensure line of sight Switch to TV mode Check SCART connections Check antenna Proceed with programme scan (see Point 7.4) None Replace batteries Select another programme list (Pt. 6.2.3.1) Increase distance between receiver and DECT base station Disconnect mains plug for 5 seconds, then switch unit on again 36 bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 37 Dear customer, we would like to repeat t...