Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Manual input is very useful e.g. if the reception data of the desired channel are known, but it only transmits at certain times. 15 4.3 SATELLITES The ASTRA 19.2° and Eutelsat 13° (Hotbird) satellites are activated as per the default factory settings. Six other satellites are pre-programmed, but not activated. If you expand your reception equipment, you can make the required settings and activations for the pre-programmed satellites in the ‘Satellite’ menu. Activate the desired satellite number, e.g. using the number keys 1...8, and call up the Input menu using the OK key. (1) Entering or amending a name Activate the {NAME} input field using key 1 followed by OK. You can select letters (upper or lower case) or numbers via the Wor Vkey. You can shift the input position right or left using the Bor Ckey. After inputting the desired name, the input field is deactivated again by pressing the OK key. (2) Inputting LO1 (3) Inputting LO2 LO1 and LO2 are preset to 9750 MHz and 10600 MHz as default by the factory. If the LNB-LO frequencies differ from the preset values, enter the relevant values here. Activate using the OK key, enter the LO frequencies using the number keys 0...9, then confirm using the OK key. Please ensure that a digital-compatible LNB is installed in your reception equipment. (4) Inputting the orbit position The parameter «Orbit position» with possible values 1...4 must be stated when operating using the DiSEqC feature. (5) Enabling {ON} The selected satellite is enabled for your reception equipment. {OFF} The selected satellite is blocked. 4.4 INSTALLATION 4.4.1 Time offset After switching on at the mains switch or after a power cut the time and date for the system clock (timer) are transferred from the data received. To ensure that the time and date of the receiver correspond to local time, a value for the deviation from standard time must be entered. The offset value for CET summer time is {+2} hours, for CET winter time {+1} hour. Please check or, if need be, correct the time offset value when setting up your equipment and also when the time changes in spring and autumn. (1) Select using key 1 or using the WVkeys, then activate using the OK key and set the desired time offset value using the BCkeys. Confirm the modifications using the OK key. N.B.: If an incorrect time offset value is entered, programme times will be indicated incorrectly. 4.4.2 Menu language (1) Select language. The menu language can be switched between {{German}, {English}, {French}, {Italian}, {Spanish}, {Dutch} and {Turkish}. GB (2) Select character set. Automatic switching of the character set is defined in the DVB standard - however unfortunately not all stations observe this standard with the result that characters from an incorrect character set may appear in a text. Automatic character switching is provided in this unit, however various character sets can be installed if required, so that e.g. Greek texts are shown in the correct character set and are thus legible. Selection: {Auto} {Standard} {Latin} {Cyrillic} {Arab} {Greek} {Hebrew}. 4.4.3 Signal paths Activation and modification of each individual field are following the usual procedure. Select the appropriate input field {XYZ} using keys 0...9 or W/ Vand activate using the OK key. The parameters are set using the Vor Wkey. The selection is confirmed using the OK key. (1) TV VCR Video output signals at TV and VCR SCART sockets - - - - - - - - - - - -The following groups are possible in the TV and VCR sockets. CVBS CVBS CVBS YC RGB CVBS (RGB offers the best picture quality on the television set) RGB YC (You can use YC with SVHS video recorders) YC CVBS YC YC CVBS: = Composite Video Broadband Signal FBAS: = Farbbild Austast Synchron Signal (equals CVBS) YC: = like S video (Y: «brightness», C: «croma») (2) TV > VCR Video/audio return path from TV to VCR unit If {ON} is selected, the video and audio signals are also transmitted from the TV socket to the VCR socket in standby mode. In {OFF} position the power consumption is reduced by approximately 0.5 watts. (3) VCR signal VCR signal from VCR unit to VCR SCART socket In VCR play mode you can choose between {CBVS/RGB} or {YC} = S video for connecting a SVHS video recorder. (4) Picture format If the {4:3} setting is set, all programmes are viewable in the 4:3 format If the {16:9} setting is set, programmes transmitted in wide-screen format and also those transmitted with the appropriate identification code are automatically viewable in 16:9 format. However, automatic adjustment of the picture width is only effective if your TV unit is equipped to process and display 16:9 formats (switching voltage 16:9 = 6 volts). 17 4.4.4 LNB settings (1) LNB {ON} standard setting {OFF} operation without LNB signal (e.g. only with special cabling systems) (2) In standby mode {OFF} standard setting N.B.: For certain units only use the {OFF} setting, as otherwise the receiver continues to supply power to the LNB also in standby mode. The...
Este manual também é adequado para os modelos :Receptor de Satélite - DSR 1000 (311.5 kb)
Receptor de Satélite - IT-DSR1000 (311.5 kb)