First Time Installation: 2.0 General Settings Plug in your Set Top Box. The “Easy Installation” menu is shown. Select the desired language with cursors and Check all settings are as you want-all settings will change to the most used setup For the chosen OSD language. Once you have correctly connected the Set Top Box. You are ready to perform the “Easy Installation” During this procedure helpful information is displayed at the bottom of the menus to guide you through all the steps to set up your digital receiver. 2.1 Terrestrial 2.1.1 Channel Search 11 2.2 Satellite 3. Menu Information Once you have installed and connected the cables of the TRIAX ST-HD527CI, the menu will is displayed. This Main Page consists of 5 main pages as shown below. • Channel Manager • Timer • User Installation • Receiver Information • Access Control Receiver During the installation the OK key confirms a selection and ey shows the Drop Down List Box. You can also use the numeric keys on the RCU to enter a numeric value. Use the PR+, PR- key to move up or down from one line to another line. To escape the menu system at anytime, press EXIT key on the RCU. 12 3.1 User Installation This menu consists of 6 sub-menus as shown below. • Antenna Setup • Channel Search • System Setting • Air Download • Parental Lock • Factory Default 3.1.1 Antenna Setup – Fixed 1. Antenna : You can select a maximum of 15 antennas with the combination switches. 2. Type : Fix 3. Satellite : Select first satellite you want. 4. LNB Type :(Normal,Universal,LNBF) Select your LNB type. If you have universal LNB, select Universal. 5. LNB Freq. : Enter the proper LNB frequency referring to your LNB using the numeric keys on the RCU. If you have a dual LNB, enter the proper value in the value box. 6. Switches (0KHz, 22KHz,None) : You can select the switches with which you want to configure the antenna. 7. DiSEqC(None,Port1,Port2,Port3,Port4) 8. DVB-T Antenna feed 5V(ON,OFF) Select EXIT to finish antenna setup. 13 3.2 Channel Search Page 3.3 Channel Search 1. Antenna : Select your antenna number. 2. Satellite : Select desired satellite using You can see the information of the selected satellite on the right side. You can edit certain preprogrammed data such as Transponder, Frequency, Symbol Rate, Polarization and 22 KHz directly. 3. Position : Disable 4. Transponder : Select desired transponder using keys. Pressing the OK key will display a Down List Box which also lets you select the desired transponder. 5. Frequency & Symbol Rate : Edit the Frequency and Symbol Rate. 6. Polarization :Select Hor or Ver. 7. Search 1 Sat : Allows you to search channels using the arrow keys. • Search TP: Search channels in one TP, which has been selected from the TP column. 14 • Search Network: Search all channels at once on all satellites. TRIAX ST-HD527CI will automatically search channels for TV and Radio. During this procedure you can see a list of the previously searched channels in the Searched List Box on the screen. 3.4 System Setting The System Setting menu allows you to set items depending on your environment. 1. OSD Language : Lets you select the desired language. 2. Audio Language: Select the desired audio language to be in top priority under the condition that this language is supported by the channel. 3. Subtitle:Select Subtitle Language 4. Screen Format: If your TV supports 16:9 screen format and selected channel provides 16:9 format program, select 16:9. 5. Resolution:1080i,720P,576P 6. Start On Channel: If you press OK key, then the channel list is displayed. You can select one channel from the list. The selected channel starts whenever you turn on TRIAX ST-HD527CI. 15 7. Sort Channel By LCN:YES or NO 8. Partition number Usually you get the information real time from the satellite automatically but sometimes they transmit wrong information. In that case, you can adjust the real time using this function. 3.5 Parental Lock This function allows you to lock the channel with a password in order to prevent children from accessing the channel. You can also protect your installed data and information using the Install Lock. • How to change the Password 1. Enter the current password. 2. Select ON of Parental Lock. 3. Enter new password. 4. Confirm your new password entering new password again. Note: Default password is 0000 Warning: Once you change the password, please keep it safely. 3.6 Factory Default If you want to bring TRIAX ST-HD527CI back to the factory default condition, select Factory Default and press the OK key. Then a warning message will be displayed. To confirm, select OK. Warning: On selecting factory default you will lose all of data and information, which was previously installed. 16 4. Common Interface TRIAX ST-HD527CI makes you enjoy various scrambled channels encrypted by Viaccess, Nagravision, Irdeto, Conax, Cryptoworks and SECA. 4.1 Preparing To be able to receive scrambled digital satellite channels you need a Smartcard and a Common Interface C...
)
