Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
2 Style your hair Note: Do not change the attachments or styler when the appliance is heating up or when it is hot. Let the appliance heat up for 3-5 minutes for perfect styling results.When unwinding the section of the hair after curling, do not pull at the hair as it would straighten the curl. Select a suitable attachment and styler for the hairstyle you want. Hairstyle Attachment Tight curls Small curling attachment ( ) Modern free flowing Conical curling attachment ( ) curls Ringlets Small curling attachment ( ) and Slip-on spiral ( ) Waves Small curling attachment ( ) and Slide-on brush ( ) Crimps Crimping/straightening attachment ( ) with cur ved surfaces ( ) facing towards each other Straight sleek style Crimping/straightening attachment ( ) with and flicks flat surfaces( ) facing towards each other Before you style your hair: 1 Ensure arrow on the ring is pointing at unlock icon on the handle ( ). 2 Slide a suitable attachment onto the metal tube ( ) of the handle ( ) and turn the ring to the right/anti-clockwise to lock it ( ). • To remove the attachment, turn the ring to the left/clockwise to unlock ( ) and pull it off. 3 Connect the plug to a power supply socket. 4 Slide the on/off switch ( ) to I to switch on the appliance. » The power-on indicator ( ) lights up and star ts blinking. » When the appliance is ready for use, the indicator stops blinking. ) on a heat-resistant surface. 6 Comb your hair and divide your hair into small sections that are not wider than 2-4cm. 5 Place the appliance with the suppor t ( Create curls or ringlets (Fig.4) 1 Select small curling attachment ( ) for styling tight curls and ringlets. 2 Press the lever ( ) to open the clip ( ) and place a section of hair between the clip and barrel ( ). • If you use the Slip-on spiral attachment ( ) to create ringlets, wind the section of hair round the barrel following the spiral profile. (Fig.6) 3 Release the lever and slide the barrel to the hair tip. 4 Hold the end of the cool tip ( ) and the handle ( ).Then wind the section of hair round the barrel from end to root. 5 Hold the barrel in the position for max. 10 seconds.Then unwind the section of hair until you can open the clip again with the lever or until you can remove the spiral from your hair. 6 To style the rest of your hair, repeat steps 2 to 5. Create free-flowing, modern curls (Fig.5) ) for styling large curls. 2 Press the lever ( 1 Select conical curling attachment ( ) to open the clip ( ) and place a section of hair between the clip and conical barrel ( ). 3 Release the lever and slide the barrel to the hair tip. 4 Hold the end of the cool tip ( ) and the handle ( ).Then wind the section of hair round the barrel from end to root. 5 Hold the barrel in the position for max. 10 seconds, and then unwind the section of hair until you can remove the conical barrel from your hair. 6 To style the rest of your hair, repeat steps 2 to 5. Create waves (Fig.7) 1 Select the small curling attachment. Then slide the Slide-on brush ( ) onto barrel. 2 Wind a section of hair round the brush. 3 Hold the barrel in the position for max.10 seconds. Then unwind the section of hair to remove the Slide-on brush ( ) from your hair. 4 To style the rest of your hair, repeat steps 2-3. Create crimps (Fig.8) 1 Select crimping/straightening attachment ( ).Make sure that the cur ved surfaces ( ) are facing each other. • To remove the the crimping/straightening plates, grab each protruded side of the plate ( ) and pull it off until it cools down. 2 Press the lever ( ) to open the attachment and place a section of hair between the crimping plates. 3 Release the lever and keep the plates together for 5 to 10 seconds. 4 Press the lever to open the plates and place the next section of hair between the plates. Make sure there is an overlap. 5 Repeat this process until you have reached the hair tip. 6 To style the rest of your hair, repeat steps 2 to 5. Create straight sleek style and flicks (Fig.9) 1 Make sure that the flat surfaces ( ) are facing each other. Press the lever ( ) to open the attachment and place a section of hair between the straightening plates. 2 Slide down slowly the length of the hair in a single motion (max. 5 seconds) from root to end, without stopping to prevent overheating. • To create your desired type of flick, turn the styler half-circle inwards (or outwards) when it reaches the last 3-5 cm of the hair tip. Hold in that position for 2 to 3 seconds, and then release it. 3 To style the rest of your hair, repeat steps 1 to 2. After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Remove hairs and dust from the appliance and attachments. 4 Clean the appliance and attachments by damp cloth. 5 Keep the appliance in a safe and dr y place, free of dust.You can also hang it with the hanging loop ( ) or store it in the supplied heat resistant pouch ( ). 3 Guarantee and service If you need information e.g. about replacement of...