Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Los fabricantes e importadores se hacen responsables del reciclaje, tratamiento y desecho ecologico, sea directamente o a traves de un sistema publico. Su Ayuntamiento o Municipio le informara sobre posibilidades de deposicion/eliminacion para los aparatos en desuso. IMPORTANT NOTES This hair iron has been designed for domestic use only. You should observe the following safety instructions: • Read these instructions carefully. Safeguard them for future reference. • Connect it only to the voltage stated on the characteristics plate. • For added safety it is advisable for the electric socket in the bathroom to be fitted with a residual current device rated at 30mA or less. • The On/Off switch must be in the «0» position when plugging it in or unplugging it. • ATTENTION: Do not use the appliance close to water contained in baths, basins and the like. When the appliance is used in a bathroom always unplug it after use, even if it is switched off, as proximity to water represents a serious hazard. • NEVER IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID. • This appliance must not be used by persons (including children) with physical, sensory or mental impairments unless they have been instructed in its correct use by a responsible adult. • Children must be supervised to ensure that they do not play with the appliance. • Do not leave the appliance unattended while it is operating. Keep the appliance out of children’s reach. • Do not handle the appliance if your hands or feet are wet, or if you are barefoot. • Never use hair lacquer or spray products while the appliance is switched on. • Do not cover the appliance with towels or other objects while it is switched on or still hot. The plates can reach very high temperatures. Keep the appliance away from surfaces that are sensitive to heat. • To avoid burns, always handle the appliance by the handles and holding points provided. Do not bring the hot areas too close to the skin, especially the face, nape or ears. • Do not operate the appliance with the cable still coiled. • Do not allow the iron to hang freely by its electrical cable. • Never unplug it by tugging on the mains cable. • Before cleaning or storing the appliance, make sure that it is unplugged and cold. • Do not switch the appliance on if the cable or plug are damaged or if it can be detected that the appliance is not working correctly • The cable must not be replaced by the user. Cable repairs and replacements must be carried out exclusively by an Authorised Technical Service Centre. • The accessories stay hot even after use, leave them to cool down completely before handling them. • The hot plates stay hot during use, so avoid touching them or resting them against the skin. • Empty the water tank before storing the appliance after use. PLATE CHOICE Select the set of plates best suited to the style that you require (straight, gentle or heavy wave). Remove the plates installed on the appliance (the top one and the bottom one) by pressing the button (7) down gently and sliding it back, as shown in figure 1. Next, install the selected set of plates (the reverse order of the above), insert the bottom part of the plate first and press down on it until it locks into position, figure 2. Remember that the plate with the holes in it has to be fitted at the top. Attention: The appliance must be unplugged and cold before changing the plates. USE Place the iron down on a flat, heat-resistant surface, plug it into the mains supply and switch it to the desired setting. Select position 1 for medium temperature and position 2 for high temperature, figure 3. Your hair iron will be ready for use after a few minutes. To speed up the heating process it is best to keep both plates touching, i.e. in the closed position. Use the lock button on the bottom of the appliance to do this. Figure 4. STRAIGHTENING TECHNIQUE Heat treatment should only be applied to healthy hair. It is not recommended for weak hair or hair that has been recently bleached, as this may have weakened it. Use the hot plates on dry hair. Heat applied to damp hair may damage the hair’s capillary fibres. Use a hairdryer after washing your hair to ensure that it is dry. There is a wide variety of gels and foams available on the market for use prior to straightening, these will make straightening easier and protect the hair. Once the iron has reached temperature, divide the hair into strands, select one strand of hair and place it between the plates. Hold the plates closed for a few seconds, pulling downward from the roots to the tip, in a single even movement. The strand of hair should be kept straight when doing this to prevent it from becoming wavy. It may be necessary to repeat this procedure two or three times on medium-length or long hair. When somebody else is helping you with the straightening, the wide support area (5) will help them to keep the plates closed together. Repeat the procedure with the rest of the hair, working strand by strand. STEAM FU...
Este manual também é adequado para os modelos :Modeladores de cabelo - PP5115/01 (872.83 kb)