Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Alliance Laundry Systems, Modelo LTS84B*H

Fabricante : Alliance Laundry Systems
Arquivo Tamanho: 1.03 mb
Arquivo Nome : f7c9e39c-e24a-4a77-9826-9c489b2c0ca6.pdf
Língua de Ensino: enes
Ir para baixar



Facilidade de uso


W018E NOTE: Always follow manufacturer’s care labels. Determine Proper Cycle REGULAR Cycle Use for sturdy items, like play or work clothes, towels, T-shirts, etc. The wash time selection will depend on the type of fabric and the amount of soil. For the best results when cleaning heavily soiled items, use the prewash setting and a longer wash time (15 minutes maximum). Lightly soiled items require less wash time. There are four settings in the REGULAR cycle – PREWASH, HEAVY, NORMAL and LIGHT. The prewash setting is for heavily soiled or stained clothing. NOTE: Detergent should not be used during the PREWASH setting. Use a spot remover directly on stains when using this setting. Detergent should be added when the PREWASH setting ends. PERMANENT PRESS Cycle Use for permanent press items and synthetics. The wash time selection will depend upon the type of fabric and amount of soil. There are two settings in the PERMANENT PRESS cycle – NORMAL and LIGHT. DELICATE Cycle Wash delicate items usually washed before by hand on this cycle. There are two settings in the DELICATE cycle – NORMAL and LIGHT. RINSE & SPIN Cycle Use for items that only need to be rinsed. This cycle is also useful in ridding your washer of suds when too much detergent or regular sudsing detergent has been used. NOTE: In some cases, the RINSE & SPIN cycle may not be enough to completely remove soap. In these cases, an additional RINSE & SPIN setting may be necessary. 800975 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1 Operating Instructions To Wash Clothes IMPORTANT: Before using your new washer, 3. Load clothes into wash drum. Refer to section on Load Sizes in your Use and Care Guide. make sure the washer cord is plugged into a 120 Volt electrical outlet that has the proper grounding and polarity. Make sure the washer hoses are connected to the hot and cold water faucets, and that the faucets are turned on. Be sure the drain hose is not kinked and is inserted into a drain. Refer to the INSTALLATION INSTRUCTIONS for details of proper washer installation. IMPORTANT: Prior to first wash, use an all- purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub. H378I H378I 4. Close the loading door tightly. The washer will not operate with the loading door open. 1. Get the clothes ready for washing. Empty pockets and cuffs. Sort items into separate loads. Pretreat stains and heavily soiled areas. D305IE1A 2. Measure and add low sudsing detergent, fabric softener, and bleach to the dispenser drawer. Refer to section on Using Your Dispenser Drawer. H379I H379I WARNING To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open. W095 H377I © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 800975 2 Operating Instructions 5. Set WASH/RINSE temperatures. 7. Select the cycle according to the type of fabric being washed. Push the timer knob in and turn clockwise to the desired cycle and wash time. Use the indicator dot on the knob as a guide. CPW162 There are four WASH/RINSE temperatures available – HOT Wash/COLD Rinse, WARM Wash/ COLD Rinse, WARM Wash/WARM Rinse, and COLD Wash/COLD Rinse. Refer to the Available Water Temperatures section for the temperature that works best for your garments. CAUTION Window may be hot in the Hot Wash Cycle. W326E 6. Select EXTRA RINSE if desired. W547I The EXTRA RINSE control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and DELICATE cycles will each provide an additional rinse. If the extra rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected. FLW831N 8. Pull the timer knob out to start the washer. The DOOR LOCKED light will come on after a short delay, water fill will begin, and wash drum will begin tumbling. NOTE: Washer door MUST be closed tightly to start washer. If items need to be added or removed after a cycle has started, push the timer knob in, wait approximately 45 seconds for DOOR LOCKED light to go out, open door, add or remove items, adjust the timer knob (if desired) and pull timer knob out. There is no agitator on this washer. Instead, the clothing gently tumbles through the water. The wash action consists of a period of tumbling in one direction, a brief pause, and then a reverse tumble in the opposite direction. The pauses are part of the tumble action and add to the uniqueness of the washer. Do not attempt to turn the timer through these pauses; they are part of the cycle. 800975 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 3 Operating Instructions Timer Although the washer cycles are automatic, the timer may be reset to lengthen, shorten or repeat a portion of a cycle. To set or reset the timer, push timer knob in to stop the washer. Hold timer knob in firmly while slowly turning it clockwise to...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias