Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
This will help you to avoid operating faults and will save you time and money. Points to observe when unpacking, installing and connecting the machine can be found on pages 23-25. Control panel 3 Before using for the first time 4 The function of the knobs and buttons 5- 8 Opening and closing the door 9 Sorting the laundry - ITCL Code - Tips on removing stains 10-11 Load size 12 Adding wash powder and conditioner 13 How to wash correctly 14 Wash programmes 15-17 What can be the cause when .. something does not work? 18-20 Care and maintenance 21 Installation and care of your LAVAMAT 22-25 When service is required 26 Control Panel 3 LAVAMAT BELLA 1103 - E no. 605 194 901 Variable spin speed 500-1100 rpm. Control lamp — Selector buttons Programme switch — \ Temperature control Wash powder drawer- Outer door (inner door for access to drum is behind this) Outer door handle- Lower front panel (pull down for drain filter and rating plate) Filter outlet-- 4 Before using for the first time You must remove these transit bars Transit bars To avoid damage during transport we See instructions on the red label which have fitted transit bars (see illustration is stuck to the appliance. Please keep above). Please remove these before these transit bars (you may move installing and connecting the machine. house). installing and The LAVAMAT is easy to install and regulations of your local Water Board connection connect. You must, however, follow the and Electricity Board. In case of doubt, instructions given on pages 21-23 and please consult a specialist, make sure that you comply with the Remove To avoid damage during transport, the protective foil switch panel and the work top trim have been covered with a protective foil which should be removed after installation. Programme Switch Besides the ”0” position (see illustration) the programme switch has 9 settings for the basic programmes and the additional programmes. These are: 1 Wash programme with pre-wash 2 Wash programme without pre-wash 3 Short programme 4 Fabric softening, starching spinning 5 Pumping - spinning 6 Woollens 7 Pumping - VARIOMATIC spinning 8 Soaking - extra pre-wash 9 Pumping With the exception of woollens you can wash all fabrics with or without spinning. The programme switch must always be operated in a clockwise direction and when the machine is switched off, to allow the switch to ’’click” into the selected setting. The programme only starts, however, when you press the ’’switch on” button. The button then begins to rotate. It stops only during the heating up period until the required temperature is reached. Temperature control With the temperature control knob you can adjust the temperature to any level between 30 °C and 95 °C. In the position marked by the brown dot • the machine carries out a cold wash (e.g. for wool). Please follow the manufacturer’s washing instructions and pay attention to the international symbols on the laundry care labels. 6 Using the spin speed selector You can select the spin speed as you wish, or as the laundry requires. The lowest setting is approx. 500 rpm., the maximum speed being 1100 rpm. The higher the spin speed, the better the drying result. Press this button after you have selected your wash programme. (See also page 14 ’’How to wash correctly”.) o Switch off button Press this button when the programme has finished. This also cancels all other functions you may have previously selected. \1/2/ Economy button for small loads Press this button if you wish to wash a smaller load, i.e. the drum is not full. Application: About half a drum full (up to 2.5 kg dry weight of whites and coloureds and up to 0.8 kg of easy-care fabrics and delicates). Depending on the programme you save: □ Water. Your LAVAMAT washes and rinses with less water. □ Electricity. The heating up time is reduced, the required temperature is nevertheless reached. □ Washing powder: Approx. 30 %. □ Time. Thanks to the reduced heating up time the programme does not last so long. Basically, you should wash full loads whenever possible to achieve maximum economy in every respect. You can combine the Vi button with programmes 1, 2 and 4, and buttons l\z7l and Iwl for easy-care fabrics. 8 The function of the knobs and buttons Energy saving button If you have only lightly to normally soiled cottons and linens (e.g. underwear, white or coloured bed linen which has only been used for a short time), you can use this button. This will help you to save up to 30 % electricity. The temperature is limited to 60 °C and the water is heated up slowly. The energy saving programme works as intensively and lasts almost as long as the programme for whites or colour-fast 95 °C. You can combine the E button with programmes 1 and 2. But not with buttons l\z7[ and I wl for easy-care fabrics. + M/2/ Pressing both buttons together makes sense if you wish to wash just a few items of lightly...