Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
Maximum opening. • Higher than a standard axle and a tilted drum for maximum ergonomics. • Maximum opening makes loading clothes easier. Easy-access filter. • Easy cleaning and maintenance. ALWAYS WITH SAVINGS IN MIND 7 kg - 15.43 lb capacity. • Fewer wash cycles means greater savings. Timer delays. • Takes advantage of energy rates. ALWAYS WITH INNOVATION IN MIND LCD displays. • Continuous display of washing cycles and times. Detergent dispenser designed for maximum ease of use. • Easy removal for cleaning. • Allows the use of liquid detergents. 5 warnings To avoid fire hazards, electric shocks, personal injury, or other types of damage, take the following precautions when using your washing machine: The washing machine comes with a manual, which includes installation, operation, and maintenance instructions. Please read all instructions carefully before using the washing machine. Do not wash garments that have been previously cleaned, washed, soaked or treated with gasoline, dry-cleaning solvents, or other flammable or explosive substances. They could give off vapors that may ignite or explode. Do not add gasoline, dry-cleaning solvents or any other flammable or explosive substances to the wash water, since these give off vapors that may ignite or explode. Do not attempt to repair the machine, replace any of its components, or service it in any way, unless it is recommended in the maintenance instructions included in the manual. Do not climb over the machine or lean on the open door. Do not use an extension or adapter to connect the washing machine to the wall outlet. The machine may only be used for its intended purposes. Follow the washing instructions recommended by the garment manufacturer. Before operating the machine, ensure that: • It has been installed according to the installation instructions. • All water lines, drain tubes, electrical connections and ground lines are connected according to local laws and/or other applicable regulations. safety instructions Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. Hydrogen gas is explosive. If the hot-water system has not been used for two weeks or more, turn on the hot-water faucets and let water flow for a few minutes before operating the washing machine. This will cause any built-up hydrogen gas to dissipate. Since the gas is flammable, do not smoke or keep an open flame on while the faucets are running. Do not allow children to play over or inside the machine. Strict supervision is required when using the machine around children. The door must be removed before the machine is disposed of or taken out of service. Do not access the inside of the machine if the drum or the agitator are moving. 6 7 washing machine Water inlet hose specifications Drain hose Top surface Power supply cable Control Detergent panel dispenser Stainless steel wash drum Filter Baseboard Door Back plugs Open-end wrench Drain tube bender Leveling feet ACCESSORIES LOCATED INSIDE THE DRUM washing machine installation and setup There are 3 locking screws located at the back of the washing machine. Using the wrench provided, loosen the 3 screws and remove them completely, along with the metal washer and the black rubber and plastic tubes which make up the locking system. Remove the base, corner protectors, and the top cover. 1 UNPACKING AND UNLOCKING THE WASHING MACHINE UNLOCKING UNPACKING a a b c Insert the 3 plastic plugs provided in the holes from which you removed the locking screws. 8 Important! Keep the locking screws in case you need to move the machine in the future. CONNECTING WATER AND 2 DRAINAGE SYSTEM installation and setup The water inlet tube is located inside the drum: a Connect the elbow end of the tube to the threaded intake of the electro valve located at the back of the machine. b Connect the other end of the tube to the water intake. Once you have CONNECTING WATER SYSTEM Important! a completed this operation, tighten the connecting bolt firmly. The elbow part of the drain tube must be firmly connected to the outlet, so it does not fall off, in order to avoid the risk of flooding. If your washing machine has an inlet for hot water, connect the red threaded tube to the hot water faucet, and to the electro valve with a red filter. CONNECTING DRAINAGE SYSTEM 9 The washing machine must be connected to the water inlet system using the new inlet tubes provided with the machine. The previously used water inlet tubes must not be used. For the washing machine to function properly, the water pressure should be 0.05-1MPa (0.5-10 kg/cm2 / 1.10-22.05 psi). It is recommended to have a fixed drain outlet, 50-70cm/19.69-27.56in from the floor. The supplied elbow should be used to prevent the drain tube from being too tight, bent or pinched. max. 70 cm. 27,56” min. 50 cm. 19,69” LEVELING THE WASHING MACHINE AND CONNECTING 3 THE POWER SYSTEM installation and setup Important! Before making any electrical connect...
Este manual também é adequado para os modelos :Máquinas de lavar - FA-4812X (3.75 mb)