Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
to EN 60456:1999 and IEC 60456 Depending on water, textile and ambient conditions the actual values given on or with the machine can deviate from the declared standard values, as they are tested according to the laboratory conditions 10 Child Lock To prevent the knobs from being played by your children you may activate “child lock” option. Activating the “Child Lock” option prevents any change from being made to a set program. To activate child lock, press both on the second and the fourth auxiliary function buttons together for 3 seconds after the machine starts the washing operation. After activating the Pre-wash auxiliary function, Its led will be blinking. Only On/Off button will be In operation when the child lock option Is selected. To deactivate child lock, re-press same auxiliary function buttons (second and fourth) for 3 seconds. In order to open the door at the end of the washing program or to change program selection, child lock must be deactivated If selected. On/Off When you press the On/Off button, your machine Is ready to select the desired program. The door open led will be on and the door Is ready to open. When the desired program Is selected, related spin speed can be adjusted and the duration of the program can be observed on the display. To switch the machine off, repress the On/Off button. Washing can only then be started when the Ejj) button Is pressed. 0 Pressing the On/Off button does not mean that the washing operation Is started! To start the washing, press the Start/Pause button! 11 Auxiliary Function Selection It is not possible to activate all auxiliary functions In all wash programs. If any auxiliary function Is selected, Its led will be on. It Is restricted to select some auxiliary functions together. For example, If the cotton program Is selected, “quick wash” and “pre-wash” functions can not be selected at the same time. If “Pre-wash” button Is selected first and the “Quick wash” function next, the led of the pre-wash function will be off as It Is not active any more. Program Follower If the machine Is on, a program can be followed by means of the program follower If a washing step Is over and the next step Is started, the led of the previous step will continue to light. It means If the washing operation Is finished, all related washing steps on the program follower will be on. Pre-wash button led will be on, only If this auxiliary function Is selected. «• @ • Additional Laundry Press the Start/Pause button. If the water level does not exceed the limitations, In 1 to 2 minutes door open led will come on. It means the washing machine Is ready to add laundry. If door open led Is not lit up after 1-2 minutes, It means the water level Inside the machine Is too high and It Is not allowed to open the door and add laundry. (Look at Program Cancelling). If you change your mind as not adding laundry, press Start/Pause button again to let the program continue. 12 End of the Program If all the wash programs are finished, all the leds on the program follower will be on . “1-2 minutes” for door open Is displayed on remain time display. Afterl-2 mln door open led will light up. At the end of the washing, all related leds on the control panel will be on. Related duration time of the selected program Is displayed and the machine Is ready to start again. To switch off the machine, press the On/Off button. Unloading the machine Machine stops automatically after all the programs are finished. Turn off the tap. In 1-2 mln, after the door open led lights up, press the door open button and open the door. Press the On/Off button to switch off the machine. Unload the machine and leave the front door open. Check to see If there Is any water left In the door hood. If so, remove with a soft cloth. 13 Time Delay By using the time delay buttons, starting time of any program can be delayed. Time delay can be set at Intervals of 30 mln. On the display, the delayed starting time Is added to the duration of the program. For example, If the program duration Is 2 hours and 16 mln and you delayed the program for 2 hours, the display will show “4:16”. After the time delay Is set, press Start/Pause button. The washing period will be started after 2 hours Program Cancelling If the program has not started yet, you can cancel the selected program by pressing Start/Pause button for 3 seconds. After 3 seconds the led of the Start/Pause button will be off and the led of the selected program will be on, where It Is possible to set a new program If the program has started and you want to cancel It, press Start/Pause button for 3 seconds. The program will moveto the “spin” step and related led on the program follower will be on. Machine will start to pump for draining and the door can be opened after the door open led Is on. 14 5 Care and maintanence Detergent dispensing drawer Clean when necessary: 1. Open the drawer as far as possible. 2. Push down the depression on the ...
Este manual também é adequado para os modelos :Máquinas de lavar - WMD 55060 (6.03 mb)
Máquinas de lavar - WMD 55100 (6.03 mb)