Assessments - 3, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high pressure hose. To connect the water supply hose: 1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply intake on the back of the machine. Tighten by hand. 2. Connect the other end of the cold water supply hose to your sink's cold water faucet and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. Option: 1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot water supply intake on the back of the machine. Tighten by hand. 2. Connect the other end of the hot water supply hose to your sink's hot water faucet and tighten it by hand. 3. Use a Y-piece if you only want to use cold water. Note: The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be used. Positioning the drain hose The end of the drain hose may be positioned in three ways: Over the edge of a sink The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving. ln a sink drain pipe branch The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground. ln a drain pipe Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm. 4 SAMSUNG Washing Machine Owner’s Instructions Installing the Washing Machine Plugging in the machine For European Users. You will NOT need to ground the plug of the washing machine. For U.S. Users. You MUST ground the plug of the washing machine. Check with a licensed electrician before using the machine to make sure it is properly grounded. For U.K. Users. Wiring lnstructions WARNING THIS APPLIANCE MUST BE EARTHED. This appliance must be earthed. In the event of an electrical short circuit, earthing reduces the risk of electric shock providing an escape wire for the electric current. The appliance is equipped with a mains lead which includes an earth wire for connecting to the earth terminal of your mains plug. The plug must be plugged into a socket that is properly installed and earthed. *The wires in this mains lead are coloured in accordance with the following code: • Green and yellow : Earth • Blue : Neutral • Brown : Live • AS the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings indentifying the terminals in your plug, proceed as follows. • Connect the green and yellow wire to the terminal in the plug marked with the letter E or the earth symbol ( ) or coloured green or green-andyellow. • Connect the blue wire to the terminal marked with the letter N or coloured black. • Connect the brown wire to the terminal marked with the letter L or coloured red. * Consult a qualified electrician or service technician if in doubt about any of these instructions. The manufacturer of this washing machine will not accept any liability for damage to persons or material for non observance of these requirements. There are no user serviceable parts inside the washing machine and if the mains lead of this appliance is damaged, it must only be replaced by qualified service personnel approved by the manufacturer because special tools are required. GREEN AND YELLOW 13 AMP FUSE BLUE BROWN WARNING Ensure that the plug and power cord are not damaged before use. If you have any reason to remove the moulded plug from this appliance, immediately remove the fuse and dispose of the plug. Do not connect the plug to a mains socket under any circumstances as there is a danger of electric shock. CIRCUITS Your washing machine should be operated on a separate circuit from other appliances. Failure to do this may cause the circuit breaker to trip or the fuse to blow. SAMSUNG Washing Machine Owner’s Instructions 5 Washing a Load of Laundry Overview of the control panel 1. Digital graphic display Displays the remaining wash cycle time,all of washing information and error messages. 2. Prewash selection button Press the button to select pre-wash. Pre-wash is available only with Cotton, Coloureds, Synthetics, Delicates,baby programs. 3. Temperature selection button Press the button repeatedly to cycle through the available water temperature options (cold water( ), 30 °C, 40 °C , 60 °C and 95 °C). 4. Rinse selection button Press the rinse button to add rinse cycles. Maximum number of rinse cycles is five. 5. Spin selection button Press the button repeatedly to cycle through the available spin speed options. B1485AV , , 400, 800, 1200, 1400 rpm B1285AV/B1285AS/B1285A/R1285AV/F1285AV , , 400, 800, 1000, 1200 rp...
Este manual também é adequado para os modelos :Máquinas de lavar - B1085A (354.77 kb)
Máquinas de lavar - B1245AV (354.77 kb)
Máquinas de lavar - B1285A (354.77 kb)