Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
(WxDxH) Weight For Non-Pump Model 31.5 kg For Pump Model 32.1 kg WASHING MACHINE OWNER'S MANUAL MODEL: WP-891 R(S)(P)/WP-988RSP WP-970(N,Q,R)(S)(P) WP-971 Q(S)(P)/WP-980Q(S)(P) WP-1050R(S)(P)/WP-1150R(S)(P) WP-1070R/WP-1070RB Please read the operating instructions carefully and throughly before installing and operating your washing machine. This washing machine is designed and manufactured for household use only. How to read the manufactured month and year from the label stuck on the back of the product. EX) 4 0 1 T W AA 0 0 0 0 1 1— Serial No. - Password code — Product code - Month — Year (The last digit to year) Part name - WASH MOTOR - SPIN MOTOR - S.D. BASKET - CYCLE TIMER ASSEMBLY - CAPACITOR - GEAR CASE ASM Remark 90 W (Output) 40 W (Output) PLASTIC P/No. : 3828EY3044A Specification (N,Q,R) : Pulsator Type (S) : See Through Cover Only (P) : Pump Model Only P/No. : 3828EY3044A CAUTION FEATURES Installation Area •Avoid area exposed to snow, rain, or where humidity " is high. It may cause electric shock. Switch Area •Avoid watering on the switch area. It may cause electric shock or fire. Volatile Material • Do not use volatile material such as Benzene, Gasoline, bug killer. • Do not leave strong alkaline substance such as bleach inside the tub. Damage on > plastic surface and < ° 1 rubber parts may occur. Installation • Install the washing machine on a horizontal support. Otherwise, fiity* it may cause vibration and noise. • Be sure to disconnect the power cord from the electric outlet before starting care and maintenance. Heat •Avoid electric heater, candle light, cigarette light, bug smoker, etc. near the machine./^*-/ It may ignite or deform plastic part. Hot water •Avoid using hot water over 50 °C. It may deform plastic parts or cause malfunction. In Operation • Do not insert the hand inside the spin dryer basket while the machine is in operation (Do not let children climb, on the machine or climb into the tub. Injury may occur.) • Do not drain the water out of the wash tub while the spin dryer basket is in operation.Otherwise the spin motor could be Power Cord • If the power supply cord is damaged, it must only be replaced by the manufacture or its sen/ice agent or a similarly qualified person in order to avoid a hazard. Electric Outlet • Avoid connecting several electric devices to single outlet. It may cause fire. > Be sure to earth the washer to prevent electric shock. To reduce the risk of electric shock, do not install the washer in humid spaces. A Connecting the drain hose • Push the clamp toward the body of the washing machine as shown in the figure. For Non-Pump Model • Be sure to reroute the hose so that it is not kinked; kinks or sharp bending in the hose will prevent proper drainage. • Make sure water is draineded smoothly by placing a base under the machine or by applying other appropnate mean. For Pump Model • L <= 1 m. 1. Water Supply Inlet Connect here with the inlet hose from the water faucet to feed water to the tub. 2. Water Selector Select “WASH" to supply water for washing and rinsing and "SPIN" for spin shower rinse. 3. Wash Timer Select the desired time for washing or rinsing. 4. Wash Program Set the program to "GentleVNornial", 'Strong11 according to kinds and quantity of the laundry. **Fm pump rrodd only" 5. Drain Selector • For Non-Pump Model Select “Wash■Rinse11 for washing and rinsing and "Drain" to drain the water out of the tub. • For Pump Model Select “Wash-Rinse11 for washing and rising and ''Drain' to drain the water out of the Cabinet, and ''Off' to turn off the drain pump. 6. Spin Timer Select the desired time for spinning. The maximum limit is 5 min. Don’t rotate the knob more than prescribed limit. WASHING COVER PULSATOR (See detail in POWER CORD SAFETY COVER-2 SPIN DRYER BASKET EARTH WIRE (Fof model8wtth two prong plug) "For Pump Modal Only* DRAIN HOSE SPIN DRYER COVER WATER SUPPLY— SELECTOR LEVER OVER FLOW FILTER ROTATION FILTER-C 2 3 INSTALLATION INSTALLATION & HOW TO WASH Installation area • Set on flat and firm floor. • Incorrect installation may course severe noise and break down. • Maintain more than 10 cm. between the side of drain hose and the wall. • A carpet must not obstruct the ventilation openings. Connecting the earth wire • Install the earth wire to prevent short-circuit due to leaking current and electric shock. • It is attached at the back of the washer. Gas . Connect it to the metal water pipe. ■" ■ If the water pipe is made of plastic, it does not have the earth effect. • Do not connect the earth wire to the gas pipe, lightning arrester, telephone connecter, etc. 5K Warning-the appliance with two-pronged plug must be grounded. Connecting the power plug • Insert the power plug into the outlet. • Before connecting the power plug, check if the voltage setting of the washer matches the outlet voltage. • If AC outlet with ground terminal is...