Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
– Press the Dry button repeatedly until the required drying time is shown on the display panel. – To deactivate, press the Dry button repeatedly until is shown on the display panel. Drying option Time-controlled The required drying time can be set to between 2:40 and 0:00 by repeatedly pressing drying the Dry button. Start/Pause button Programme progress Changing the programme Pausing the programme Cancelling the programme Press Start/Pause to start the selected programme. The 0 (Remaining time) is shown on the display panel. The i ! (start of the programme) symbol is lit. The programme progress is shown on the display panel: ! - Prewash N - Main wash ' - Rinse B - Final spin . - Drying To change the programme: • Select a new programme. • Press Start/Pause. i The new programme starts from the beginning. Press and hold the Start/Pause button while the programme is in progress until appears on the display panel. and 0 (Remaining time) appear alternately while the programme is paused. Press Start/Pause to continue with the programme. Press and hold Start/Pause until is displayed. For washing programmes at high temperatures: – Cooling down laundry: choose Rinse + Spin. – Press Start/Pause. For programmes at low temperatures: – choose Empty + Spin. – Press Start/Pause. Caution! if you cancel the drying programme, the laundry may still be very hot. Washing and drying • Set the programme selector to the desired programme, Washing only e.g. Cottons/Coloureds 60°C. – 0 (Remaining time) and the recommended load in kg are shown alternately on the display panel. The ! symbol flashes. • If necessary, adjust the spin speed and select any washing options for your individualised programme > page 13. –The Dry function must not be activated. i • Load the laundry > page 8. – Observe the maximum load, Programme table > page 28. • Press the Start/Pause button. – 0 (Remaining time) is shown in the display. The ! (Programme start) symbol lights up. – The washing programme starts. • Set the programme selector to the desired drying programme. Drying only – The display panel alternately shows 2 (remaining time) and the recommended load in kg. • Press the Dry button to set the drying time > page 14. • Load the laundry > page 8. – Observe the maximum load, Programme table > page 28. • Press the Start/Pause button. – 0 (Remaining time) is shown on the display panel and the . and ! symbols light up. – The drying programme starts. Successive washing and drying. Washing and drying • Set the programme selector to the desired programme, e.g. Cottons/Coloureds 60°C. – 0 (Remaining time) and the recommended load in kg are shown alternately on the display panel. The ! symbol flashes. • If necessary, adjust the spin speed and select any washing options for your individualised programme > page 13. • Press the Dry button to set the drying time > page 14. • Load the laundry > page 8. – Observe the maximum load in kg, Programme table > page 28. • Press the Start/Pause button. The drying programme that is carried out is automatically determined by i the washing programme, see the Programme table > page 28. End of the programme Rinse i Childproof lock The washing and drying programmes are ended automatically. appears on the display panel. • Set the program selector to Off. • Remove the washing from the drum. • Leave the door open so that the inside of the washer-dryer can dry out. • Turn off the tap (not necessary on models with Aqua-Stop). If the spin function was deactivated at the start of the wash cycle, $ (no final spin = laundry remains in last rinsing water), the washing programme is automatically stopped after the final rinse. The display panel shows alternating with . In order to drain the rinsing water and, if required, spin the laundry: • Press the Spin rpm button repeatedly until the required spin speed is set. The water is drained and the washer-dryer spins the laundry. The programme is completed when appears in the display field. The maximum spin speed depends on the selected wash programme. If you do not wish to spin the laundry: • Set the spin speed to $ (Rinse hold) . The water is drained, but the washer-dryer does not spin the laundry. The programme is ended when appears in the display field. • Set the program selector to Off. • Remove the laundry. • Leave the door open so that the inside of the washer-dryer can dry out. • Turn off the tap (not necessary on models with Aqua-Stop). For preventing the washer-dryer functions that you have set from being changed inadvertently. Activate/Deactivate: Press the Option and Select buttons at the same time to activate or deactivate the childproof lock. When the childproof lock is activated, @ lights up on the display. Cleaning and care Safety information Housing and control panel Drum Detergent drawer Risk of electric shock You must disconnect the appliance from the mains first. Never clean the washer-dryer with a water jet! Risk of explosion. Never clean the washer-dryer with solvents. Risk o...
Este manual também é adequado para os modelos :Máquinas de lavar - WK14D320GB/02 (1.13 mb)
Máquinas de lavar - WK14D320GB/03 (1.13 mb)