Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Under no circumstances open the door with the emergency release while the drum is still turning. If you cannot correct a fault yourself (switching on/off) or a repair is required: – Turn the programme selector to Off and unplug the mains plug from the socket. – Turn off the tap and call the after-sales service –> page 24. After-sales service Before you call the after-sales service, please check whether you can correct the fault yourself –> page 20. You will be charged if a technician is called out, even during the warranty period. You can find information about your nearest after-sales service here or in the After-sales service directory (depending on the model). Please give the after-sales service the product number (E-Nr.) and production number (FD) of the appliance. Enter the numbers of your appliance here. You can find this information on the rating plate in the frame of the door. Please help us to avoid unnecessary call-outs by quoting the product and production numbers. This will also save you the associated additional costs. You can rely on the competence of the manufacturer. Please contact us. This way, you can ensure the repair is carried out by trained service technicians who are equipped with genuine spare parts. Installation instructions Safety information Included with the appliance The washer-dryer is very heavy. Take care when lifting it. Do not operate the washer-dryer if it has any visible damage. If you are in any doubt, please consult our after-sales service or your retailer. Do not install the washer-dryer outdoors or in areas exposed to frost. Frozen hoses can crack or burst. As a result, the washer-dryer could be damaged. Do not stand the washer-dryer upside down or on its side. Do not lift the washer-dryer by protruding parts (e.g. door). Do not place the washer-dryer behind a door or a sliding door which could prevent the washer-dryer door from being opened. This will prevent children from locking themselves in and putting their lives in danger. Remove the transport braces and cross connectors and store in a safe place. In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. If in doubt, have a technician connect the appliance. Number Description 4 Covers for openings left after removing the transport bolts. 1 Spanner 1 24-40 mm dia. hose clamp for connection to a siphon. 1 Door template 2 Door hinges with screws On the back of the washer-dryer: –Water drain hose – Water supply hose – Mains cable with plug – Instruction manual and booklet containing after-sales service addresses Moisture may remain in the drum following the final inspection which every washer-dryer undergoes before leaving the factory. Removing the transport safety bolts Unscrew all four screws using the spanner supplied Remove all 4 transport safety bolts completely and take the mains cable out of the retainers. Insert the protective covers. – Before using the appliance for the first time, you must make sure that all 4 transport safety bolts have been removed and kept safe for any subsequent transport. – If you need to transport the appliance at a later date, always re-affix the transport safety bolts to prevent damage to the machine. – Appliance stability is essential to ensure that the washer-dryer does not Positioning and “creep” during spin cycles. levelling – The installation area must be firm, clean and level. – Parquet floors and soft floor coverings, e.g. carpets or foam-backed floor coverings, are unsuitable. Slide sheets make it easier to slide the washing machine into the Positioning installation recess. – Can be ordered from the after-sales service, spare part no. 66 1827. – Moisten the slide sheets with a mixture of water and washing-up liquid before sliding the machine into place. Do not use grease and/or oil. Intense noise, vibrations and “wandering” may be the result of incorrect Levelling levelling. – All four appliance feet must be firmly on the ground. – The washing machine must not wobble. – Check the alignment of the washing machine with a spirit level and adjust if necessary. – The washing machine must not rest against the side panels of the installation recess. – The lock nuts of the front appliance feet must be screwed tightly against the housing. . Hose and cable lengths Left-hand connection or Right-hand connection approx. 1350 approx. 1400 approx. 1000 approx. 760 min. 500 max. 900 approx. 1400 approx. 950 min. 500 max. 900 Dimensions in mm Dimensions Width x depth x height Weight 595 mm x 584 mm x 820 mm 85 kg To prevent leaks or water damage, you must observe the instructions in Water connection Water supply * depends on the model Water drainage Drainage into a siphon this section. If in doubt, have a technician connect the appliance. The water supply and drain hoses can be routed to the left of right, depending on installation conditions. Do not use a used inlet hose. Only use the inlet hose supplie...
Este manual também é adequado para os modelos :Máquinas de lavar - WK14D540EU/03 (583.22 kb)