Assessments - 4, GPA: 4 ( )

Fabricante : GE Arquivo Tamanho: 1.57 mb Arquivo Nome : AWN-USB-11N2.pdf Língua de Ensino:

One USB A-type Extension Cable . One Installation CD (Drivers, Utility, User’s Manual) 2. Software Installation Note: The following installation was operated under Windows 7. (Procedures will be same for Windows Vista, XP and 2000 Operation System) Step1: Insert the Wireless USB adapter into the USB slot of your computer. The system will automatically find the device and search for its driver. For Windows 7 .. Windows System will pup-up the message for new searched device. For Windows Vista/XP/2000 .. Please click Cancel to continue. Step2: Insert Wireless USB Adapter Installation CD into CD-ROM drive then windows below will appear. Click Install Driver & Utility to begin device driver installation. Step3: Select the language for this installation from the choices below and click Next> to continue. Step4: The InstallShield Wizard will install Wireless LAN Driver and Utility on your computer. For next step, click Next> to continue. Step5: Click Install begin the installation.. Step6: Please wait for a while for installing process. Step7: After Wizard has finished the installing, choose “Yes, I want to restart my computer now” before you can use the utility. And then, click Finish to compete the setup. Step8: When Utility setup is completed, a shortcut of Wireless LAN Utility will appear in the computer’s desktop. Double click the shortcut and start using the WLAN USB adapter. To check if Wireless PCI card is properly installed, you can right-click Computer .. choose Properties .. click Device Manager. [Configuring Wireless Network] Step 1: Open the Wireless Utility and go to “Available Network” tab, double-click the network which you want to connect or click “Add to Profile” button to continue. Step 2: The Wireless network properties will be displayed, enter the network key if it is necessary. And click “OK” to continue. Step 3: In the “Profile” tab, you can see the available network is listed. Step 4: And now, you can browse your Internet Explorer to surfing the web. 3. Wireless LAN Utility The Wireless LAN Utility is an application that helps you to configure the USB Wireless LAN adapter and monitor the link status and statistics during the communication process. 3.1 General In the “General”, you can immediately monitor the link status. Status: Current connection status Speed: Show current transmit rate and receive rate. Type: Network type in use. Encryption: Encryption type in use. SSID: The Current AP name of user type. Signal Strength: Receive signal strength Link Quality: Display link quality strength Network Address: Display the current connection’s MAC Address, IP address, Subnet Mask, and Gateway information. Click “ReNew IP” button to refresh the current AP. 3.2 Profile In the “Profile”, you can view the current using Available Point(s). You can add, remove and edit the current Available Point(s). Also you can duplicate the AP or Set current AP as Default. 3.3 Available Network The “Available Network” shows all Access Points, Routers or Adapters nearby when operating in Ad-Hoc mode. Click “Refresh” button to collect the SSID and Channel information of all the wireless devices nearby. If you want to connect to any device on the list, double-click the item on the list, and the card will automati...

Baixe o seu

Para fazer o download, introduza 2 dígitos :