Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
5. Black & Decker battery packs that are labeled “NiMH” should only be used with chargers labeled “NiMH“ or “NiCd/NiMH.” 6. Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean. 7. Do not immerse charger in water or any other liquid. SAVE THESE INSTRUCTIONS FOR FUTURE USE Features A. jam clearing latch B. contact trip C. no-mar pad D. low nail indicator windows E. magazine F. pusher release (other side) G. lock-off H. trigger I. LED Status Indicator NAIL SPECIFICATIONS Lengths 5/8'' - 2" (15 mm - 50 mm) F G I H A B C D E Diameters 18 gauge / calibre 18 7 90514937 BDBN1202 1/18/07 9:14 AM Page 8 3 Operating Instructions LED Status Indicator (Figure 3) The electronic indicator tracks the status and condition of the nailer. There are two basic indicators: • A flashing RED light indicates that the nailer has a jammed nail. • A permanent RED light indicates that the battery is low or out of power and needs to be charged. Using the Lock-Off (Figure 4) The nailer is equipped with a lock-off switch which prevents the tool from actuating. To engage, push the lock-off to the full rearward position as shown in figure 4. Loading the Tool (Figure 5) CAUTION: Keep tool pointed in a safe direction when loading nails. CAUTION: Never load nails with the contact trip or trigger activated. 5 CAUTION: Always engage lock off and remove battery pack before loading or unloading nails. To load fasteners: 1. Read all “Safety Warnings” before using tool. 2. Engage lock off. 3. Remove battery. 4. Depress pusher release and pull magazine back. 5. Insert fasteners into the side of the magazine. Be sure the fasteners ride on their tips in the nail channel as shown in figure 5A. 6. Push magazine closed until it locks in place. Actuating Tool WARNING: Always wear eye and ear protection when operating tool. To operate the nailer: 1. Disengage lock off. 2. Insert battery pack and lock in place. 3. Depress the contact trip firmly against the work surface. 4. Depress and maintain pressure on the trigger. CAUTION: A nail will fire each time the trigger is depressed as long as the contact trip remains depressed. 5A 8 90514937 BDBN1202 1/18/07 9:14 AM Page 9 Clearing a Jammed Nail (Figure 6) If a nail becomes jammed in the nosepiece, keep the tool pointed away from you and follow these instructions to clear: 1. Engage lock off. 2. Disconnect battery. 3. Release pusher from behind nails. 4. Pull up on latch then pull up to open front door. 5. Remove bent nail, using pliers if necessary. 6. If driver blade is in the down position, insert screwdriver or other rod into nosepiece and push driver blade back in position. 7. Remove rod and close front door. 6 8. Lift latch to engage wire and pull back to lock in place. 9. Reinsert nails into magazine (see Loading the Tool). 10. Push magazine closed until it locks in place. Maintenance Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. The RBRC™ Seal The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel- cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY. 9 90514937 BDBN1202 1/18/07 9:14 AM Page 10 T TTTTr rrrro oooou uuuub bbbbl lllle eeees ssssh hhhho ooooo oooot tttti iiiin nnnng gggg Problem Possible Cause Solution • LED status indicator is flashing red. • Nail jammed in the nosepiece. • Engage lock off. Disconnect battery. Release pusher from behind nails. See page 9. • LED status indicator is staying on RED . • Batter...
Este manual também é adequado para os modelos :Pistola de pregos - BDBN1202 (272.36 kb)
Pistola de pregos - BDBN1802 (272.36 kb)