Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Black & Decker, Modelo 492848-00

Fabricante : Black & Decker
Arquivo Tamanho: 542.24 kb
Arquivo Nome : 39d4d56d-e271-4e21-99a7-4d3cefaa9a84.pdf
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


AND DATE CODE AVAILABLE. IN MOST CASES, ABLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. SAVE THIS MANUAL FOR FUTURE REFERENCE. VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Cat. # BDN200 Form # 492848-00 JAN ‘06 Copyright © 2006 Black & Decker Printed in China 492848-00,BDN200 NAILER 2/2/06 1:35 PM Page 2 SAFETY GUIDELINES / DEFINITIONS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage. SAVE THESE INSTRUCTIONS Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Black & Decker strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed. GENERAL SAFETY RULES • Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. (Fig. 1) • Operator and others in work area MUST wear safety glasses with side shields. These safety glasses must conform to ANSI Z87.1 requirements (approved glasses have “Z87” printed or stamped on them). (Fig. 2) • Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger. In "contact actuation mode", tool will fire a fastener if tool is bumped. • Choice of triggering method is important. Check manual for triggering options. See “Using the Tool“ section of this manual. 2 Fig. 2 Fig. 1 492848-00,BDN200 NAILER 2/2/06 1:35 PM Page 3 • Never point tool at yourself or others in work area. Serious injury or death may occur if the tool is activated. (Fig. 3) • Never use oxygen or other bottled gasses. Explosion will occur. Never use combustible gases or any other reactive gas as a power source for this tool: explosion and serious personal injury will result. (Fig. 4) • Wear ear protection to safe-guard against possible hearing loss. Ear protection equipment must conform to ANSI S3.19 requirements. (Fig. 5) • Use clean, dry, regulated, com-pressed air at 70 to 120 PSI, (4.8 to 8.3 BAR). (Fig. 6) • Do not connect tool to pressure which potentially exceeds 200 PSI (13.7 BAR). • All air line components (hoses, connectors, filters, regulators, etc.) must be rated for a maximum working pressure of at least 150 PSI (10.3 BAR) or 150% of the maximum system pressure, which ever is greater. • Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected. (Fig. 7). • Disconnect tool from air supply hose before doing tool maintenance, clearing a jammed fastener, leaving work area, moving tool to another location, or handing the tool to another person. (Fig. 7) • Never use a tool that is leaking air, has missing or damaged parts, or requires repair. Make sure all screws and caps are securely tightened. (Fig. 8). • Never use tool if safety, trigger or springs are inoperable, missing or damaged. Do not alter or remove safety, trigger, or springs. Make daily inspections for free movement of trigger and safety mechanism. (Fig. 8) Fig. 6 Fig. 5 Fig. 3 Fig. 4 Fig. 7 Fig. 8 3 492848-00,BDN200 NAILER 2/2/06 1:35 PM Page 4 • Do not use tool without safety warning label. If label is missing, damaged or unreadable, contact 1-800-544-6986 for a replacement. (Fig. 9) • Only use parts, fasteners and accessories approved by Black and Decker. • Connect tool to air supply before loading fasteners, to prevent a fastener from being fired during connection. The tool driving mechanism may cycle when tool is connected to the air supply. (Fig. 10) • Always assume the tool contains fasteners. No horseplay. Respect the tool as a working implement. (Fig. 11) Fig. 9 Fig. 11 Fig. 10 Fig. 12 Fig. 13 Fig. 14 • Operator and bystanders should wear hard hats to safeguard against possible injuries. (Fig. 12) • Do not load fasteners with trigger or safety depressed, to prevent unint...

Este manual também é adequado para os modelos :
Pistola de pregos - BDN200 (542.24 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias