If this occurs, let the cartridge cool off for a while. Then re-insert it and try to charge it once more. 0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times. 0 If you wish to charge two battery cartridges, allow 15 minutes between chargings on the

Suitable for timber frames, roofing, joist and a host of other applicationsMakita now have a better solution with this easily portable machine. Gas nailer GN900SE Fire up to 7,200 7.2v Li-ion batteryUse of a li-ion battery allowsfor compact and lightweighttool design. 30 min charge time. Hex wrench Attached to the machine for easy access to adjust the depthof the nail drive. Gas cell chamber Quick and easy load system. LED lightservice indicator Green: Good batteryRed: Low/dead batteryOrange: Er

2-114". 2-112") Min. hose diameter I Dimensions IL x W x H) I Net weight 310 mm x 133 mm x 305 mm 6,5 mm 1114,,) I (12.3/16" x 5.1/4" x 12") I kg 16'' Ibs) * Manufacturer reserves the right to change specifications without notice. Note: Specifications may differ from country to country. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IMPORTANT SAFETY INSTRUCTIONS WARNING: WHEN USING THIS TOOL, BASIC SAFETY PRECAUTIONS SHOULD ALWA

MEDIUM & WIDE CROWN STAPLERS EFFICIENCYEFFICIENCY Quick release cam-lock opens guide assembly to easily clear jammed staples, minimizing downtime Built-in air filter minimizes dust and debris, prolonging life and minimizing maintenance ACCURACY Depth drive adjustment allows user to drive staples to the precise level on the surface CONVENIENCE Hook allows tool to remain close-by but never in the way MEDIUM & WIDE CROWN STAPLERS FEATURE LIGHTWEIGHT DESIGN FOR COMFORT AND CONTROL Top-Loading Magazi

(L x W x H) 14-1/2" x 3-7/16" x 11-3/8" 14-1/2" x 3" x 10-1/4" Net Weight 4.9 lbs. 5.1 lbs. Shipping Weight 6.8 lbs. 7.0 lbs. UPC Code 088381-07749-1 088381-07750-7 Makita offers a wide variety of accessories for Pneumatic Staplers. For a complete listing, please refer to the Makita General Catalog, or visit makitatools.com, or call 1-800-4MAKITA. All specifications subject to change without prior notice. All models and accessories subject to stock on hand. SNTF-0307 4M MA-0212-07 For more infor

Failure to do so may result in serious injury to tool operator or persons in the vicinity. 4 FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION CAUTION: • Always lock the trigger and disconnect the hose before adjusting or checking function on the tool. 007006 1 A B 1. Adjuster To adjust the depth of nailing, turn the adjuster. The depth of nailing is the deepest when the adjuster is turned fully in the A direction shown in the figure. It will become shallower as the adjuster is turned in the B direc

Air supply hoses shall have a minimum working pressure rating of 10.7 kgf/cm2G (150 PSIG) or 150 percent of the maximum pressure produced in the system whichever is higher. CAUTION: Low air output of the compressor, or a long or smaller diameter air hose in relation to the nailing frequency may cause a decrease in the driving capability of the tool. Lubrication To insure maximum performance, install an air set (oiler, regulator, air filter) as close as possible to the tool. Adjust the oiler so t