Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). L4889 Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Parts Consumer Information Seat Bottom Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the sc

Tool needed for assembly: Phillips Screwdriver (not included). Product features and decoration may vary from the photo above. ™ IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. WARNING Healthy Care High Chair Model Number: B8866 Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Product features and decoration may vary from the photo above. ™ IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE R

Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while in the high chair. • Never leave child unattended. • Do not use the high chair unless all components are correctly fitted and adjusted. Prevent

S•Desde el frente de la silla alta, jalar para afuera la parte del hombro de los cinturones de la cintura/hombros y, luego, introducirla en las ranuras de los cinturones de hombro deseadas en la almohadilla del reposacabeza, almohadilla del asiento y respaldo. Tirar de los cinturones para verificar que estan seguros en el respaldo. eShoulder Portion fPartie pour l’epaule SParte del hombro 5 eTo change shoulder belt slots: •From the back of the high chair, push the shoulder portion of the waist/s

f•Placer le haut du coussin sur le dossier du siege. •Plier le bord inferieur du coussin sous le bord du siege pour le fixer en place. •Inserer la partie pour l’epaule de la courroie ventrale et d’epaule dans les fentes du coussin et du dossier du siege. - Utiliser les fentes du bas pour un petit enfant. - Utiliser les fentes du haut pour un enfant plus grand. S•Ajustar la parte superior de la almohadilla sobre el respaldo. •Doblar el borde inferior de la almohadilla debajo del borde del asiento

Jalar el extremo libre del cinturon de la cintura .B A B A B A eWaist/Shoulder Belt fCourroie ventrale et d’epaule SCinturon de la cintura/hombro eCrotch Belt fCourroie d’entrejambe SCinturon de la entrepierna 2 eFree End fExtremite libre Passant SExtremo libre eBuckle fBoucle SHebilla eTighten fSerrer SAjustar eWaist/Shoulder Belt fCourroie ventrale et d’epaule SCinturon de la cintura/hombro 15 eSecuring Your Child fInstallation de l’enfant SAsegurar al bebe 1 e•Place your child in the seat. Po

•Desde la parte delantera de la unidad, colocar la almohadilla en la silla. •Levantar la parte inferior de la almohadilla. Introducir los dos aros elasticos de la almohadilla en los orificios del asiento. •Desde la parte posterior e inferior del asiento, enganchar los aros elasticos en las lenguetas del asiento. eBack and Bottom View fVue de l’arriere et du dessous SVista posterior e inferior e•Lift the assembly upright. •From the front of the assembly, place the pad onto the seat. •Lift the bot

Glisser le regleur vers le bas. Remarque : Apres avoir ajuste le systeme de retenue, tirer dessus pour s’assurer qu’il resiste bien. S•Para ajustar los cinturones de los hombros: Sujetar el ajustador y jalar para abajo la cinta frontal del hombro. •Para desajustar los cinturones de los hombros: Deslizar el ajustador para abajo. Nota: Despues de ajustar el sistema de sujecion a la medida del bebe, tirar del mismo para verificar que esta bien seguro. eLoosen fDesserrer SDesajustar eSlide Adjuster

Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Warning and Caution WARNING Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • Always keep child in view while in the high chair. • Never leave child unattended. • It is recommended tha

Pull on the belts to be sure they are secure in the seat back. Shoulder Portion 5 To change shoulder belt slots: • From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots. 12 Securing Your Child 4 • To tighten the shoulder belts: Hold the adjuster and pull the front shoulder strap down. • To loosen the shoulder belts: Slide the adjuster down. Note: After adjusting the restraint system to fit your child, make sure you pull on it to be sur