Assessments - 3, GPA: 4 ( )

Fabricante : Amana Arquivo Tamanho: 893.88 kb Arquivo Nome : 37fe5881-d65a-46ee-a90a-36640d717b36.pdf Língua de Ensino:

Remove the filters Remove by pulling straight up with hands inserted into the four holes around the exhaust vent shroud in the sequence of "Exhaust vent shroud - Lint filter -Exhaust filter", as shown in figure 1. The filter fixed in the bottom of the drum Exhaust 2. Clean the lints vent shroud Separate "exhaust vent shroud","lint filter" and "exhaust filter" and clean the lints on the filter and exhaust filter with a soft brush or vacuum cleaner. Do not damage the filters (as shown in figure 2) 3. Install the filters After cleaning, assemble in the sequence of "exhaust filter -filter-exhaust vent shroud",align the recesses in the center of filter with the projection in the center of drum and make sure that it is firmly inserted (as shown in figure 3). Note: The filter fixed in the bottom of the drum shall also be cleaned with a soft brush. i DO NOT USE YOUR DRYER WITHOUT THE LINT FILTER. Dust Cleaner Figure 2 Figure 3 Clean the interior drum or dryer housing, with wet soft cloth, if stained. * Do not wash directly with water. * Do not use thinner, gasolene or alcohol. * Do not use any type of spray cleaner when cleaning the interior. Hazardous fumes or electric shock could occur. If dryer drum becomes stained, clean the drum with a damp cloth. Remove any residue before drying the next load. Clean cabinet with mild soap and water. Donot use harsh or abrasive cleaners, this could damage the dryer. Trouble Shooting (If your dryer exhibits problems, please unplug the power cord before checking) The following maybe unrelated to a malfunction of the dryer itself, please reconfirm before calling a serviceman. If it does relate to a malfunction, please contact our service agent or after-sales service and do not repair it by yourself. Problem Possible Cause What to do Timer knob does not turn • Is the power cord inserted firmly? • Insert the power cord firmly Drum does not turn • Is the door closed? • Close the door. • Is the power cord inserted? • Insert the power cord firmly. • Does the receptacle have power? • Check the power cord receptacle. No hot air blown out • Is the timer incorrectly set up in cold air? • Set to hot air The laundry is not throughly dried (some of the clothes still wet after dryer stops) * Is the back filter clogged? • Have the clothes been fully dehydrated? • Clean the filter. * Dehydrate the laundry completely. • Is the laundry too much? • Reduce the laundry quantity. • Have the dryer have been added during operation? • Dry the undried laundry again. • Does the laundry twist? • Loose the twisted laundry and dry again. * Have any clothes dry easily and hardly been dried together? • Dry the undried laundry again. * Is the dryer placed in a small and badly-vented space? • Place the dryer in a well-vented place. Dryer does not start • Is power failure? • Try again after power recovered • Is the power cord inserted firmly? • Insert the power cord firmly • Is the door closed? • Close the doo...

Baixe o seu

Para fazer o download, introduza 2 dígitos :