Log:
Assessments - 1, GPA: 3 ( )

Instruções de Operação Makita, Modelo DPC6411

Fabricante : Makita
Arquivo Tamanho: 4.59 mb
Arquivo Nome : DPC7321_OM.pdf
Língua de Ensino: enfr
Fotos e especificações  Makita  DPC6411
Ir para baixar



Facilidade de uso


-Check the fuel tank cap regularly for good sealing. Observe the accident prevention instructions issued by trade associations and insurance companies. NEVER make any modifications to the Power Cut! You will only be putting your own safety at risk! Perform only the maintenance and repair works described in the instruction manual. All other work must be carried out by MAKITA Service. Use only original MAKITA spares and accessories. The use of non-MAKITA spares, accessories, or cutting discs increases the risk of accident. We cannot accept any responsibility for accidents or damage occurring in association with the use of cutting discs or accessories other than original MAKITA. First aid For the event of a possible accident, please make sure that a firstaidkitisalways immediatelyavailablecloseby.Immediatelyreplace any items used from the first aid box. When calling for help, give the following information: -Place of the accident -What happened -Number of injured people -Kind of injuries -Your name! NOTE Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system. Vibration may cause the following symptoms to occur in the fingers, hands or wrists: ”Falling asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin colour or of the skin. If any of these symptoms occur, see a physician! Disposal and environmental protection Be mindful of the environment! Dispose of worn-out or defective cutting discs in accordance with your local disposal regulations. To protect unusable cutting discs from misuse, destroy them before disposal. When the Power Cut is worn out or damaged beyond repair, have it disposed of or recycled in an environmentally sound manner. If necessary, consult your local authorities. 27 28 SERVICE 29 Technical data DPC8111 DPC8112 Displacement cu in (cm3) 4.9 (81) 4.9 (81) Bore in (mm) 2.05 (52) 2.05 (52) Stroke in (mm) 1.49 (38) 1.49 (38) Max. power hp (kW) 6.2 (4.5) 6.2 (4.5) Max. torque Nm 5.2 5.2 Idling speed 1/min 2,500 2,500 Clutch engagement speed 1/min 3,800 3,800 Engine speed limitation 1/min 9,350 ± 145 9,350 ± 145 Max. spindle speed 1/min 4,300 3,750 Sound pressure level at the operators ear dB (A) 100 100 Sound pressure level at the bystander’s position (50 ft) dB (A) 79 79 Vibration acceleration ah,w per EN 1454 -Tubular handle (idle/rated spindle speed) m/s2 5.6 / 6.3 5.6 / 6.3 -Rear handle (idle/rated spindle speed) m/s2 8.8 / 6.0 8.8 / 6.0 Carburetor (diaphragm carburetor) Type WALBRO WJ-105 Ignition system (with speed limitation) Type electronic Spark plug Type NGK BPMR 7A / BOSCH WSR 6F / CHAMPION RCJ 6Y Electrode gap in (mm) .020 (0.5) .020 (0.5) Fuel consumption at max. load per ISO 8893 kg/h 2.3 2.3 Specific consumption at max. load per ISO 8893 g/kWh 500 500 Fuel tank capacity fl oz (l) 37 (1.1) 37 (1.1) Mixture ratio (fuel/two-stroke oil) - when using MAKITA HP 100 high-performance oil 100:1 100:1 - when using MAKITA oil 50:1 50:1 Cutting disc for 80 m/sec. 2) in 14" / 0.8" / 0.2" 3) 16" / 0.8" / 0.2" 3) Cutting disc for 80 m/sec. 2) 4) in 14" / 1.0" / 0.2" 3) 16" / 1.0" / 0.2" 3) Arbor diameter in 0.8" (1.0") 4) 0.8" (1.0") 4) V-belt no. 965 300 490 965 300 480 Overall weight (tanks empty, without cutting disc) lb 22.05 23.37 DPC6410 DPC6411 DPC7310, 7320 DPC7311, 7321 Displacement cu in (cm3) 3.9 (64) 4.5 (73) Bore in (mm) 1.85 (47) 1.97 (50) Stroke in (mm) 1.46 (37) 1.46 (37) Max. power hp (kW) 4.4 (3.2) 5.6 (4.2) Max. torque Nm 4.0 5.0 Idling speed 1/min 2,500 2,500 Clutch engagement speed 1/min 3,800 3,800 Engine speed limitation 1/min 9,350 ± 145 9,350± 145 Max. spindle speed 1/min 4,300 4,300 Sound pressure level at the operators ear dB (A) 97 104 Sound pressure level at the bystander’s position (50 ft) dB (A) 84 86 Vibration acceleration ah,w per EN 1454- Tubular handle (idle/rated spindle speed) m/s2 6 / 5 7 / 6- Rear handle (idle/rated spindle speed) m/s2 8 / 6 8 / 7Carburetor (diaphragm carburetor) Type WALBRO WJ-105 Ignition system (with speed limitation) Type electronic Spark plug Type NGK BPMR 7A / BOSCH WSR 6F / CHAMPION RCJ 6Y Electrode gap in (mm) .020 (0.5) .020 (0.5) Fuel consumption at max. load per ISO 8893 kg/h 1.65 2.1 Specific consumption at max. load per ISO 8893 g/kWh 500 500 Fuel tank capacity fl oz (l) 37 (1.1) 37 (1.1) Mixture ratio (fuel/two-stroke oil) - when using MAKITA HP 100 high-performance oil 100:1 100:1 - when using MAKITA oil 50:1 50:1 Cutting disc for 80 m/sec. 2) in 12" / 0.8" / 0.2" 3) 14" / 0.8" / 0.2" 3) 12" / 0.8" / 0.2" 3) 14" / 0.8" / 0.2" 3) Cutting disc for 80 m/sec. 2) 4) in 14" / 1" / 0.2" 3) 14" / 1" / 0.2" 3) Arbor diameter in 0.8" 0.8" / 1.0" 0.8" 0.8" / 1.0" V-belt no. 965 300 470 965 300 470 Overall weight (tanks empty, without cutting disc) lb 21.38 21.82 21.6 22.04 2) Circumference speed at max. engine speed3) Outside diameter / arbor hole / thickness 4) Country-specific 13 Denomination of components (Illustration shows model DPC731...

Este manual também é adequado para os modelos :
Máquinas de soldar - DPC7310 (4.59 mb)
Máquinas de soldar - DPC7311 (4.59 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias