Assessments - 2, GPA: 4 ( )

Fabricante : Metabo Arquivo Tamanho: 1.1 mb Arquivo Nome : Língua de Ensino:

4. Preparing for Operation 4.1 Placing the machine A Caution! Always stand the machine on its feet only. >20 cm The machine draws in air at its front and bottom, which is given off through the ventilating slots at the rear. Ensure an unhindered airflow. The distance of the machine to walls or other equipment must be at least 20 cm. 5. Operation A Caution! Check all connections and supply lines before turning on. 3 Note: For manual arc welding this machine uses the Hot-start, Arc-force and Anti-stick functions. Hot-start function When contacting the weld metal with the electrode, the set welding current is increased for a short period to ensure that the arc will start. This brief increase of the welding current is limited to the maximum electrode current. Arc-force function During the welding process the machine keeps the energy (heat) brought into the weld metal at a constant level, even if the distance between electrode and weld pool varies. Anti-stick function If the machine detects a short-circuit in the welding process, it will switch to minimum current within 0.5 sec to keep the electrode from burning out. 5.1 Manual arc welding 1. Connect the earth cable to the – pole. 2. Connect the welding cable to the + pole. A Caution! Note information on polarity shown on the packaging of the electrodes used; reverse polarity, if necessary. A Caution! For manual arc welding the Lift-arc ignition must be disabled. To check, turn the rotary switch counterclockwise. 3. Attach earth cable at a suitable location of the workpiece. 4. Turn master switch ON. 5. Set desired welding current. The welding machine is now operational. 5.2 TIG welding When using a TIG welding torch (optional accessory), both models can also be used for TIG welding. 1. Connect the welding current cable of the TIG torch (– pole). 2. Check the gas supply to the TIG torch. 3. Attach the earth cable at a suitable location of the workpiece (+ pole). 4. Turn master switch ON. 5. Set desired welding current. 6. Activate Lift-arc ignition. To check, turn the rotary switch clockwise. The welding machine is now operational. TIG welding The arc can only be started by touching the workpiece with the electrode (Lift-arc ignition). Approach the weld metal with the electrode. Contact of the electrode to the weld metal causes a short-circuit, the welding current is reduced. The material is heated up and a short arc generated. By lifting the electrode the arc is started and will burn at the set welding current. 5.3 Shutting down 1. Set master switch to “0”. 2. Disconnect the earth cable from the workpiece. 3. Unplug the power cable. 6. Maintenance This welding machine contains no userserviceable parts. Depending on dust accumulation the dust should be blown out from the machine with dry and oil-free compressed air every 4 - 6 months. Periodically perform a check for visible damage. Contact a qualified electrician if any of the cables are damaged. 7. Available Accessories For special welding tasks the ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :