Assessments - 2, GPA: 4 ( )

Fabricante : Schumacher Arquivo Tamanho: 951.59 kb Arquivo Nome : 00-99-000985.pdf Língua de Ensino:

Resultant de la Proposition californienne 65, ce produit contient des produits chimiques dont l’etat de la Californie reconnait causer le cancer et des anomalies congenitales ou d’autre danger pour la reproduction. • 1 • General SAFETY PrecauTIONs 1. The following safety information is provided as a guideline to help you operate your new welder under the safest possible conditions. Any equipment that uses electrical power can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety information is provided to give you the information necessary for safe use and operation. When a WARNING precedes a procedure step, it is an indication that the step contains a procedure that might be injurious to a person if proper safety precautions are not heeded. When a procedure step is preceded by a CAUTION, it is an indication that the step contains a procedure that might damage the equipment being used. A NOTE may be used before or after a procedure step to highlight or explain something in that step. READ ALL SAFETY INSTRUCTIONS CAREFULLY before attempting to install, operate, or service this welder. Failure to comply with these instructions could result in personal injury and/or property damage. Published standards on safety are available. They are listed in ADDITIONAL SAFETY INFORMATION at the end of this SAFETY SUMMARY. The National Electrical Code, Occupational Safety and Health Act regulations, local industrial codes and local inspection requirements also provide a basis for equipment installation, use, and service. SHOCK HAZARDS 1.1 WARNING: Electric shock can kill! To reduce the risk of death or serious injury from shock, read, understand, and follow the following safety instructions. In addition, make certain that anyone else who uses this welding equipment, or who is a bystander in the welding area understands and follows these safety instructions as well. IMPORTANT! TO REDUCE THE RISK OF DEATH, INJURY, OR PROPERTY DAMAGE, DO NOT ATTEMPT OPERATION of this welding equipment until you have read and understand the following safety summary. Do not, in any manner, come into physical contact with any part of the • welding current circuit. The welding current circuit includes: A. the work piece or any conductive material in contact with it, B. the ground clamp, C. the electrode or welding rod, D. any metal parts on the electrode holder. Do not weld in a damp area or come in contact with a moist or wet • surface. Do not attempt to weld if any part of clothing or body is wet. • Do not allow the welding equipment to come in contact with water or • moisture. Do not drag welding cables, wire feed gun, or welder power cord through • or allow them to come into contact with water or moisture. Do not touch welder, attempt to turn welder on or off if any part of the • body or clothing is moist or if you are in physical contact with water or moisture. Do not attempt to plug the welder into the power source if any part of • body or clothing is moist, or if you are in physical contact with water or moisture. Do not connect welder ground clamp to or weld on electrical conduit. • Do not alter power cord or power cord plug in any way. • Do not attempt to plug the welder into the power source if the ground • prong on power cord plug is bent over, broken off, or missing. Do not allow the welder to be connected to the power source or attempt • to weld if the welder, welding cables, welding site, or welder power cord are exposed to any form of atmospheric precipitation, or salt water spray. Do not carry coiled welding cables around shoulders, or any other part of • the body, when they are plugged into the welder. Do not modify any wiring, ground connections, switches, or fuses in this • welding equipment. Wear welding gloves to help insulate hands from welding circuit. • Keep all liquid containers far enough away from the welder and work area • so that if spilled, the liquid can not possibly come in contact with any part of the welder or electrical welding circuit. Replace any cracked or damaged parts that are insulated or act as • insulators such as welding cables, power cord, or electrode holder IMMEDIATELY. EMF INFORMATION 1.2 WARNING: Welding current will cause electromagnetic fields as it flows through welding cables and internal wiring. There has been and continues to be some concern and research about such fields. Until the final conclusions of the research are reached, you may wish to minimize your exposure to electromagnetic fields when welding or cutting. To reduce magnetic fields in the workplace: Keep cables close together by twisting or taping them. • Arrange cables to one side and away from you. • Do not coil or drape cables around your body. • Keep welding power source and cables as far away from you as practical. • Connect work clamp to work piece as close to the weld as possible. • About Pacemakers: Pacemaker wearers consult your doctor prior to using an...

Baixe o seu

Para fazer o download, introduza 2 dígitos :