Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
1. Enter into the PRESET menu, press the POS+/button to select POS., then select the unwanted program number withthe VOL+/-button. PRESET POS 24 SKIP OFF BAND UHF FINE AFT ON SEARCH ASM S-RCV OFF 2. Press the POS+/-button to select "SKIP". Press the VOL+/-button to select "SKIP ON". Thus, after exiting the menu, the position number will then be skipped when you select programs with the POS+/-button. If you want to skip other unwanted programs, repeat PRESET POS 24 SKIP ON BAND UHF FINE AFT ON SEARCH ASM S-RCV OFF (or OFF) step 1 above to change the program number. Note: you can select the skipped channel by pressing the direct channel select buttons, and the position number displayed on the screen is in red. To restore skip a position number Enter into the PRESET menu, Select the position number you want to restore. Press the POS+/-button to select "SKIP". Press the VOL+/-button to select "SKIP OFF". MFT (Manual Fine Tuning) When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture and sound are not standard), you can correct them by making use of Manual Fine Tuning (FINE). 1. Enter into PRESET menu, select the program number you want to fine-tune. PRESET POS 25 SKIP OFF BAND UHF FINE AFT ON SEARCH ASM S-RCV OFF 2. Press the POS+/-button to select FINE, then press and hold the VOL+ or VOL-button, the channel begins PRESET fine tuning until the optimum picture and sound is SKIP POS 25 OFF achieved. (Press VOL+ button to fine-tune upward, while VOL-button to fine-tune downward. The AFT BAND FINE AFT UHF ON function will be set to OFF mode automatically) SEARCH ASM S-RCV OFF Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the sound system is wrong, please do adjustment according to The setting of colour and sound system (on page 10) to set the proper colour and sound system. 3. To exit the menu, press the RECALL button. 9 OPERATION Tuning in (continued) AFT (Automatic Frequency Tuning) If picture and sound’s effect of the channel is instead poor by making use of FINE, you can correct them by making use of AFT. Enter into the PRESET menu, press POS+/-button to select AFT, press VOL+/-button to select AFT ON. Note: If the program is in AFT ON, the position number displayed on the screen will be in green. PRESET POS 22 SKIP OFF BAND UHF FINE AFT OFF SEARCH ASM S-RCV OFF The setting of colour and sound system 1. Press the RECALL button, the colour and sound system will be displayed on the screen. 9 AUTO B/G 2. If the colour is abnormal, press the C-SYS button to select proper colour system. Every time you press the C-SYS button, the colour system will change in the sequence below. AUTO PAL N3.58 N4.43 9 PAL B/G If the sound is abnormal, press the S-SYS button to select proper sound system. Every time you press the S-SYS button, the sound system will change in the sequence below. 3. I D/K B/G M/N 9 PAL B/G Now you can watch the broadcasting TV program on the preset channels. Note: You can also make use of SYSTEM menu to set the colour and sound system. (Refer to SYSTEM SETTING on page 14.) 10 OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To select a two-digitposition number (10~99) Press --/---button to display --on the screen, then press the channel number. To select a three-digit position number (100-255) Press --/---button to display ---on the screen, then press the channel number. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons (0~9) and --/---button To select a one-digit position number (0-9) Press the 0~9 button directly. Using the POS+/-buttons Press POS-to select lower position numbers; POS+ to select higher ones. Using the PREVIOUS channel button ( ) 13 AUTO B/G 9 AUTO B/G 125 AUTO B/G 2 3 1 Press the button on the remote controller can swap the current viewed channel with the previous one. For 2 11 example, the channel you previously watched is 11, the present channel is 2, press the button, it will return to channel 11, press the button again it will return to channel 2. 11 OPERATION Convenient Picture and Sound Controls Selectable picture To select the picture mode You can select the picture quality instantly among four preset modes and one user-set mode. Press the P.M button to select the desired picture quality. SOFT, STANDARD , VIVID , LIGHT and PERSONAL (user-set) can be selected cyclically. To set the desired picture quality to the MEMORY position SOFT STANDARD VIVID LIGHT PERSONAL 1. Press the PIC button repeatedly to select the desired adjusting item. Press the VOL+/-button to adjust the level. PICTURE BRIGHT CONTRAST COLOUR SHARP TINT 28 Item Pressing (PERSONAL) SOFT STANDARD VIVID LIGHT VOLVOL+ COLOUR paler deeper 38 38 50 50 BRIGHTNESS darker lighter 45 50 48 58 CONTRAST weaker stronger 28 50 63 63 SHARPNESS softer sharper 16 32 34 34 *TINT purplish greenish 00 00 00 00 PICTU...