Assessments - 5, GPA: 4
(
)
)
|
Fotos e especificações Hyundai H-TV2107 |
Facilidade de uso
When the cabinet has become dirty or stained, dip a piece of gauze or soft cloth into a dilute solution of neutral cleanser and wipe clean. Never use thinner or benzene since they will damage the surface of the cabinet. . When the television screen becomes dirty, wipe it gently with a piece of soft, lint-free cloth. Do not scratch the surface of the screen. NOTE ON CONDENSATION Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or under high humidity. Be sure any condensation has evaporated completely before power on the unit. 3 COLOR TV FEATURES Color systems Sound systems Preset Programs Preset Method Frequency Range Voltage Range Display Functions select Remote Control AVI/O Useful functions - PAL, SECAM, NTSC3.58 &NTSC4.43 - DK, BG - 100 - Auto Search, Manual Store, Fine Tune - Hyper Band Tuner - 180-240V, ~50Hz - On Screen Display (OSD) - Pop up menu - Full Function Infra-red Remote Controller - 1 RCA-type AV Input - 1 SCART AV input/output - Sleep Timer (10-120min.) - Auto Off (after 15 min with no signal) - Sound Mute - Blue Background selection (while no signal) - 3 Default, 1 User Picture Settings - Channel Skip - AV Stereo - Game - Notebook - Calendar - Biological Clock 4 1. DESCRIPTION AND PREPARATION 1.1 INSTALLATION OF ANTENNA 300 OHM FLAT CABLE Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above. NOTE: For better reception, especially in outlying area or where ghost or interference happens, an external roof-mounted antenna is recommended. For UHF TV reception, use the specified UHF antenna. Consult the local sale dealer. . When using 300 OHM flat cable, a 300 OHM - 75 OHM adapter should be adopted for a proper connection to the antenna jack. 1.2 POWER CONNECTION_ Plug the AC cord into an AC outlet. NOTE: When you disconnect the power supply cord, pull it out by the plug. Never pull the cord itself. 5 1.3 FRONT PANEL 1. POWER BUTTON To turn ON/OFF the TV set. 2. STANDBY INDICATOR Lights when TV is in the STANDBY MODE. 3. REMOTE SENSOR To receive the infra-red signals from remote handset. 4. PROGRAM(A/Y) BUTTONS Select program number cyclically. To turn on the TV when it is in standby mode. To select item in sub-menu. 5. VOLUME/PICTURE CONTROL ( A/T) BUTTONS To decrease / increase the sound volume and picture settings level. Channel searching upward/downward in MANUAL and FINE menu. 6. MENU BUTTON To display the main menu. Press and hold the MENU button for over 3 seconds, it will perform AUTO SEARCH function. 7. TV/AV BUTTON To switch between TV program and AV input. To turn on the TV when it is in standby mode. 8. SPEAKERS 6 1.4 REAR TERMINAL & SIDE AV 1. 75 OHM ANTENNA INPUT 2. SCART AV INPUT/OUTPUT 3. AUDIO/VIDEO IN 2 (SIDE AV INPUT) 2 OPERATION OF REMOTE CONTROL 2.1 DESCRIPTION OF REMOTE CONTROL KEYS INTRODUCTION OF KEY FUNCTION This TV features with a full-function remote control handset. For a more compact remote unit design, some of the keys are multiple with more than one function. The following text describes the inunction of keys on remote control unit. Functions related to notebook operated are marked with a symbol*. 7 1. STANDBY BUTTON When the main power is on, to turn the TV set on or off. 2. MUTE BUTTON To temporarily turn off the sound and to restore it by pressing it again 3. SLEEP BUTTON Set the sleep timer from 120 to 10 minutes by pressing the SLEEP button repeatedly. To display the remaining time, press SLEEP button once. To cancel the sleep timer, press the SLEEP button until “OFF” appears. 4. DISPLAY BUTTON To display the current program number and function status. Press the button once again to display the current time on the screen. 5. SOUND SYSTEM BUTTON To directly select sound system without going into the submenu. 6. (0-9) DIGIT KEYS To select program number directly. *To select 0-9 digits, A-Z(or a-z) letters, common marks and punctuation marks when writing data or information to be stored in notebook. 7. RECALL BUTTON Press to return to the previously viewed channel. 8. PICTURE/* DELETE BUTTON Cyclically select the default setting level of picture. Within the on-screen menu of FAV.CH, press to delete the undesired channel NO. In notebook mode, to delete the word or symbols previously stored. 9. NOTEBOOK BUTTON To activate the notebook function. 10. GAME BUTTON To enter or exit the game directly. 11. FAVORITE BUTTON To browse the preset favorite channels. This button will not function if you have not set any favorite program. 12. COLOR SYSTEM BUTTON To select color system without going into submenu. 13. MENU/*INSERT BUTTON Press to display the main menu. Also goes back to the previous screen menu or exits the menu from screen. To insert or overwrite a letter, digit or symbol when you edit the information previously stored in notebook. 8 14. TV/AV BUTTON To switch betw...