Assessments - 7, GPA: 3.6
(
)
)
|
Fotos e especificações Hyundai H-TV2902PF |
Facilidade de uso
Do not place heavy objects on the appliance. • Do not allow anyone, especially children, to push anything into the slots or any other openings in the cabinet. • Do not allow children to play with the remote control. • Do not place the appliance near appliances, which may cause electromagnetic interference, such as microwave ovens or loudspeakers. • For added protection against lightning, or when left unattended and unused for an extended period of time, unplug the appliance from the power supply. • Do not leave the appliance switched on when you do not use it. • Do not operate after malfunction or damage of cord. • Do not handle the plug with wet hands. • Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center. 3 Colour TV features • Modern ergonomic design • Pure Flat picture tube • Child lock function • 200 program memory • Auto & manual programmable scan • Improved picture contrast • Clock • Sleep timer with 10 minutes intervals up to 180 minutes • Real time On/Off programmable timer • 2 front speakers • Multifunctional colored Russian / English OSD • "Blue screen" function • Adjustment resume function Preparation_ Installation • Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. • Allow enough space between the receiver and the wall to permit ventilation. • Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure. • This TV receiver can be connected to AC 90-260Volts. 50/60 Hz. Never connect to DC supply or any other power supply. • Do not install the receiver in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area. • Do not cover the ventilation openings when using the set. 4 Connecting to an aerial or cable television network To view television channels correctly, a signal must be received by the set from an outdoor aerial. 1. Connect the aerial to the coaxial socket on the rear of the television. 2. Insert the plug into the power supply. 3. Switch ON using the ® button on the front panel. The power indicator will light up. NOTE: • The indicator light on the front panel TV lights in standby mode. • When you switch on the television the indicator light is dies out. • The power turns off approximately 5 minutes after a TV station has stopped broadcasting. Connecting the equipment to the input/outputs Location the Audio/Video connector is depending on the television model. • The Audio/Video connector on the side of the TV is used for AV equipment. • With TV/AV button you can select video and audio inputs. • With TV/AV button you can select the signal from other equipment such as VCR or CD video player. Inserting the batteries in the remote control 1. Remove the battery cover. 2. Insert the 2 UM4-AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Replace the battery cover. Replace with new batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Batteries Recommended 2) Remove batteries when they are exhausted or if the remote control is not to be used for a long time. 5 Input and output terminals S-Video IN It can be connected to the following appliances: Home Theatre, DVD-player, video-tape recorder, video camera, tape recorder and audio amplifier, etc..... *Please keep AC cord unplugged when connecting TV system. *Do not Connect AV IN 1(VIDEO) and S-VIDEO together. 6 Control location 1. Main Switch 2. Power Indicator 3. Remote Sensor 4. Side AV In (Optional) 5. Speakers 6. Program Down / Up Button 7. Volume Down / Up Button 8. Menu Button 9. AV/TV Button 10. AV In (Scart Jack) 11. Péritélévision (Scart Jack) 12. Antenna Input Socket (75 Ohm) 13. S-Video In 14. AC Power Cord 7 Remote control POWER (!) MUTE SYS 0-9 PROG +/- VOL+/-CH I/II Power (Stand By) button Press this button to turn the TV on/off. Press any Number Button or Program Up/Down Button, picture and sound will appear on within a few seconds. Mute button Press once to mute the sound, press again to return to previously set sound level. Sound system button When the sound system is incorrect, press this button to select the correct sound system. Program selection button Push the number for your desired program and the program indicator will be displayed on the screen. Press number key 0-199 for program selection. Press the number keys to select teletext pages in teletext mode PROG-, PROG+ button Press the Program Up Button to select the program forwards. Press the Program Down Button to ...