Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”. AUTO CLOCK SETTING You can have the TV/DVD/VHS set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/DVD/VHS will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS). Make sure ... • TV/DVD/VHS power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/DVD/VHS is connected directly to it. (See NOTES:) • The channel is properly set in advance. (See page 16.) NOTES: • Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason. • If the TV/DVD/VHS is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/DVD/VHS must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically. If you do not know what your local PBS station is, then follow “Manual Clock Settings” on page 18. The TV/DVD/VHS cannot control the channels of the cable converter box or satellite box. 1 Select “SETTING CLOCK” - TV/VCR SETUP TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER’S SET UP Press the SETUP button on the V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] remote control. ZERO RETURN TIME SEARCH INDEX SEARCH Press the Arrow K or L button to point to “SETTING CLOCK”. Then, press the Arrow B button. – SETTING CLOCK – Press the Arrow B or s button B AUTO CLOCK [ON] 2 Set “AUTO CLOCK” to [ON] AUTO CLOCK CH [AUTO] repeatedly until [ON] appears. MANUAL CLOCK SET D.S.T. [OFF] 3 Enter the channel number for the PBS station Press the Arrow K or L button to – SETTING CLOCK – point to “AUTO CLOCK CH”. AUTO CLOCK [ON] AUTO CLOCK CH [AUTO] Then press the Arrow B or s but ton until the channel number for MANUAL CLOCK SET B D.S.T. [OFF] your local PBS station appears. If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/DVD/VHS will search automatically all available channels for the local PBS station, and will select that channel. 4 Exit the Auto Clock Setting Press the SETUP button on the remote control to return to TV mode. 5 Turn off the TV/DVD/VHS Turn the TV/DVD/VHS off. Because the Auto Clock functions automatically while the TV/DVD/VHS is off. If you choose [AUTO], • the TV/DVD/VHS must search until the PBS channel is found. It must scan each channel for a couple of seconds to determine if that channel is transmitting the XDS signal. • if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature. - 17-EN 1C29 MANUAL CLOCK SETTING Make sure ... • TV/DVD/VHS power must be turned on. In the example below, the clock is to be set to: DATE May 7th, 2002 SETTING TIME 5:40PM 1 Select “SETTING CLOCK” 6 Select the hour – MANUAL CLOCK SET – - TV/VCR SETUP TIMER PROGRAMMING Press the SETUP button on the Press the Arrow K or L button until B SETTING CLOCK MONTH DAY YEAR CHANNEL SET UP USER’S SET UP 0 5 / 0 7 TUE 2 0 0 2 remote control. your desired hour appears. V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] HOUR MINUTE (Example: 5, PM) Press the Arrow K or L button to ZERO RETURN TIME SEARCH 0 5 : – – PM INDEX SEARCH point to “SETTING CLOCK”. Then, press the Arrow B button. Then, press the Arrow B button. – MANUAL CLOCK SET – 7 Select the minute MONTH DAY YEAR – SETTING CLOCK – 0 5 / 0 7 TUE 2 0 0 2 2 Select “MANUAL CLOCK Press the Arrow K or L button until the desired minute appears. SET” SET” AUTO CLOCK [ON] HOUR MINUTE AUTO CLOCK CH [AUTO] (Example: 40) 0 5:4 0 PM Press the Arrow K or L button to B MANUAL CLOCK SET point to “MANUAL CLOCK SET”. D.S.T. [OFF] Then, press the Arrow B button. 8 Start the clock 5:40 PM Press the SETUP button on the remote control. 3 Select the month – MANUAL CLOCK SET – Although seconds are not displayed, Press the Arrow K or L button until MONTH DAY YEAR 0 5 / – – – – – – – – – they begin counting from 00 when your desired month appears. you press the SETUP button on the HOUR MINUTE (Example: May > 05) – –:– – – – remote control. Use this feature to synchronize the Then, press the Arrow B button. clock with the correct time. NOTE: 4 Select the day – MANUAL CLOCK SET – When unplugging the AC cord or if there is a power MONTH DAY YEAR Press the Arrow K or L button until failure fo...