Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
compartment lid. the compartment. 3 Two AA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment. Press the lid downward and slide it. To insure safe operation, please observe following precautions: . Use two (2) AA or LR6 type alkaline batteries. . Always replace batteries in sets. . Do not use a new battery with an used battery. . Avoid contact with water or liquid. . Do not expose the remote control to moisture, or heat. . Do not drop the remote control. . If a battery has leaked on the remote control, carefully wipe the case clean and install new batteries. . Danger of explosion if battery is incorrectly replaced. . Dispose of used batteries according to batteries manufacturers instructions and local rules. 17 BEFORE OPERATION TOP CONTROLS AND INDICATORS Used to open or close the On-Screen Menu. (p.18, 19) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select the image level. (p.29, 33) Lights green when the projector is ready to be turned on. And it blinks green in the Power management mode. (p.40, 46, 55-56) Becomes dim when the projector is turned on. And it becomes bright when the projector is in stand-by mode. (p.20, 21, 55-56) Turns to yellow when the projection lamp reaches its end of life. Blinks yellow when the lamp cannot light up. (p.48, 55-56) Blinks red when the internal temperature of the projector is too high. (p.46, 55-56) Used to select an input source. (p.24, 31) Used to select an item or adjust a value in On-Screen Menu. They are also used to pan the image in the DIGITAL ZOOM +/– mode. (p.30) The POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons. (p.23) Used to execute the selected item. It is also used to expand/compress the image in the DIGITAL ZOOM mode. (p.30) Used to turn the projector on or off. (p.20, 21) Used to adjust zoom. (p.22) FOCUS BUTTON Used to adjust focus. (p.22) ZOOM BUTTON This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LENS SHIFT BUTTON Used to select the Lens Shift function. (p.22) AUTO PC ADJ. BUTTON Used to operate the Auto PC Adjustment function. (p.26) KEYSTONE BUTTON Used to correct keystone distortion. (p.21, 37) Used to select speakers. (Internal or External) EXT. SP SWITCH TOP CONTROLS AND INDICATORS BEFORE OPERATION ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector with the On- Screen Menu. Refer to the relevant pages to operate each adjustment. 1. DISPLAY MENU Press the MENU button to display the On-Screen Menu. 2. MOVING POINTER Move the pointer (. see below) or adjust a value of an item by pressing the POINT buttons on the top control or on the remote control. . The Pointer is an icon in the On-Screen Menu for selecting an item. See figures in “FLOW OF ON-SCREEN MENU OPERATION” below. 3. SELECT ITEMS Select an item or set the selected function by pressing the SELECT button. Used to move the Pointer UP/DOWN/ RIGHT/LEFT. POINT BUTTONS REMOTE CONTROL FREEZEFREEZE SELECTSELECT D.ZOOMD.ZOOM MUTEMUTE VOLUMEVOLUME- MENUMENU NO SO SHOWHOW IMAGEIMAGE VOLUMEVOLUME+ KEYSTONENTOE AUTO PC ON-OFFAUTO PON-OFF LOCKLOCK MENU BUTTON SELECT BUTTON Used to select the item. POINT BUTTONS TOP CONTROL MENU BUTTON Used to move the Pointer UP/ DOWN/ RIGHT/ LEFT. SELECT BUTTON Used to select the item. FLOW OF ON-SCREEN MENU OPERATION Display ON-SCREEN MENU MENU BAR MENU ICON 1 1 Press the MENU button to display the On-Screen Menu (a MENU BAR). A red frame is a POINTER. Select Menu to be adjusted 2 2 Move the POINTER (red frame) to a MENU ICON that you want to select by pressing the POINT RIGHT/LEFT buttons. POINTER (red frame) Press the POINT UP/DOWN buttons to move the POINTER. POINTER (red frame) ITEM Control or adjust items through ON-SCREEN MENU 3 3 Press the POINT UP/DOWN buttons and move the POINTER (red frame or red arrow) to an ITEM that you want to adjust, and then press the SELECT button to show the ITEM DATA. 4 4 Adjust the ITEM DATA by pressing the POINT RIGHT/LEFT buttons. Refer to the relevant pages for details of respective adjustments. SELECT BUTTON ITEM DATA Press the POINT LEFT/RIGHT buttons to adjust a value or set a function. BEFORE OPERATION MENU BAR FOR PC SOURCE Press the MENU button when connecting to the PC input source. GUIDE WINDOW Shows the selected item of On-Screen Menu. PC SYSTEM MENU Used to select a computer system. (See pages 24 and 25.) IMAGE SELECT MENU Used to select an image level among Standard, Real, and Image 1 ~ 10. (See page 29.) SCREEN MENU Used to adjust the size of an image. [Normal/True/Wide/ Full/Digital zoom +/–] (See page 30.) SETTING MENU Used to change settings of the projector or reset the Lamp replacement counter. (See pages 38-44.) SOUND MENU Used to adjust the volume or mute the sound. (See page 23.) IMAGE ADJUST MENU Used to adjust the computer ...
Este manual também é adequado para os modelos :TV - LC-X71 (1.64 mb)
TV - LC-X71 (1.64 mb)
TV - LC-X71L (1.64 mb)