Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
- 18-EN 9I03 NOISE CANCEL (in the Still mode) This feature allows you to reposition or reduce the noise lines of a still picture. Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal. VERTICAL HOLD CONTROL If the picture begins to vibrate vertically while in Pause/Still mode, stabilize the picture by pressing the CHANNEL K or L button. NOTE: If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”. PICTURE CONTROLS TRACKING ADJUSTMENT • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK Press the MENU button on the remote control. CHANNEL SET UP B USER’S SET UP V-CHIP SET UP Press the PLAY/K or STOP/L but-LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH ton to point to “USER’S SET UP”. Then press the F.FWD/B button. – USER’S SET UP – B RENTAL [ON] REPEAT PLAY AUTO RETURN [OFF] 2 Set “RENTAL” to [ON] Press the PLAY/K or STOP/L but ton to point to “RENTAL”. Press the F.FWD/B or REW/s button until [ON] appears. 3 Exit the Rental setting Press the MENU button on the remote control to return to the TV mode. 4 Start playback Press the PLAY button to start playback. “RENTAL PLAY B” appears. • Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR. TO CANCEL THE RENTAL MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. RECORDING TWO DIFFERENT TAPE SPEEDS Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play). The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode. Tape Speed Recording/Playback Time Type of tape T60 T120 T160 SP mode 1 hour 2 hours 2-2/3 hours SLP mode 3 hours 6 hours 8 hours Note: You can playback a tape recorded in LP mode (Long Play). ERASE PREVENTION You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette. If you decide to record on the tape again, cover the hole with plastic tape. Tab Plastic Tape - 19-EN 9I03 Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is being recorded. 1 Select the channel to be recorded Press the number buttons on the CH 10 remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box. 2 Select the tape speed Press the SPEED button to select the desired tape speed (SP/ SLP). SP REC 3 Begin recording Press the RECORD button. SP 4 Stop recording Press the STOP button when recording is completed. SKIPPING UNWANTED SCENES DURING RECORDING Press the PAUSE/STILL button to PAUSE temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. SP NOTES: • After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage. • If “CLOSED CAPTION (ON)” is selected, the On- Screen Display will appear for 5 seconds, then disappear. This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • You cannot start OTR with the remote control. • Recording starts immediately when the REC/OTR button is pressed. • When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. • To stop the OTR oper...