Assessments - 3, GPA: 4.3 ( )

Fabricante : Samsung Arquivo Tamanho: 10.25 mb Arquivo Nome : Língua de Ensino:

Otherwise, just click "OK" and exit the dialog box. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) »• D-Sub Input Mode Resolution H-Freq.(kHz) V-Freq.(Hz) Pixel Clock Freq.(MHz) Sync Polarity (H/V) IBM 640x350 31.469 70.086 25.175 +/- 720x400 31.469 70.087 28.322 -/+ 640x480 31.469 59.940 25.175 -/- VESA 640x480 37.861 72.809 31.500 -/- 640x480 37.500 75.000 31.500 -/- 640x480 43.269 85.008 36.000 -/- 800x600 37.879 60.317 40.000 +/+ 800x600 48.077 72.188 50.000 +/+ 800x600 46.875 75.000 49.500 +/+ 800x600 53.674 85.061 56.250 +/+ 1024x768 48.363 60.004 65.000 -/- 1024x768 56.476 70.069 75.000 -/- 1024x768 60.875 75.029 78.750 +/+ 1024x768 68.677 84.997 94.500 +/+ 1024x768 48.364 60.000 65.000 - / - 1024x768 60.023 75.029 78.750 + /+ 1360x768 47.712 60.015 85.800 +/+ 1152x864 53.783 59.959 81.750 -/+ 640x480 35.000 70.000 28.560 -/+ VESA GTF 800x600 43.750 70.000 45.500 -/+ 1024x768 57.672 72.000 78.434 -/- »■ HDMI/DVI Input Mode Resolution H-Freq.(kHz) V-Freq.(Hz) Pixel Clock Freq.(MHz) Sync Polarity (H/V) 640x350 31.469 70.086 25.175 +/- IBM 720x400 31.469 70.087 28.322 -/+ 640x480 31.469 59.940 25.175 -/- VESA 800x600 37.879 60.317 40.000 +/+ 1024x768 48.364 60.000 65.000 -/- 1360x768 47.712 60.015 85.800 +/+ >■ The interlace mode is not supported. »• The set might operate abnormally if a non-standard video format is selected. >■ Separate and Composite modes are supported. SOG is not supported. English - 34 & $ limage Lock l> I Position > Auto Adjustment > image Reset > I v __imctye LuiK |j^ I Coarse 1 50 _ Fine 50 & * f ^ Move 0 Enter Ï) Return Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENu button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 3. Press the ▲ or ▼ button to select "PC", then press the ENTER button. 4. Press the ENTER button to select "Image Lock". 5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button. 8. Press the ◄ or ► button to adjust the screen quality. Press the ENTER button. 7. Press the EXIT button to exit. Changing the Image Position: Adjust the PC’s screen positioning if it does not fit the TV screen. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Position", then press the ENTER button. 3. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER button. 4. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button. 3. Press the EXIT button to exit. Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER button. 3. Press the EXIT button to exit. TV -“1 Ü Image Lock > Position > & » « lAuto Adjustment > 1 Image Reset > II *•: ^ Move 0Enter Return TV PC Ü Image Lock > & Position > Auto Adjustment > 1 Image Reset i> i English - 35 Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object. Troubleshooting: Before Contacting Service Personnel No sound or picture ♦ Check that the mains lead has been connected to a wall socket. ♦ Check that you have pressed the POWER(!) buttons on the front of the set. ♦ Check the picture contrast and brightness settings. ♦ Che...

Baixe o seu

Para fazer o download, introduza 2 dígitos :