Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
In this case, re-select the Anynet+ device. ^ The Anynet+ functions don't operate for the products from other manufacturers. ^ In Anynet+ mode, the colour buttons may not work properly. ^ The r*D, (►£) operations may differ depending on the device. English - 33 Recording You can make a recording of a TV programme using a recorder. Press the m button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) ^ The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. ^ You can also record the source streams by selecting "Record" after pressing the TOOLS button. ^ Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. Listening through a Receiver_ You can listen to sound through a receiver instead of the TV speaker. 1. Press The TOOLS button. Then Press the ENTERS' button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Receiver", then press the ENTERS button. 2. Press the ◄ or ► button to select to "On", then press the ENTERS button. Now you can listen to sound through the receiver. 3. Press the EXIT button to exit. ^ When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. ^ If the receiver is exclusively for a home theatre only (supporting audio only), it may not appear in the device list. ^ In case of a content with copyright problem, listening through the receiver may not properly operate. ^ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page 22) English - 34 Check Points before Requesting Service Symptom Solution Anynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver. ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device’s Video/Audio/HDMI cable connections. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play etc.) ■ When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. I want to exit Anynet+. ■ Select View TV in Anynet+ menu. ■ Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of P®/®, CH LIST, PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) The Connecting to Anynet+ device... message appears on the screen. ■ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. You cannot use the play function when Plug & Play is in progress. The connected device is not displayed. ■ Check whether or not the device supports Anynet+ functions. ■ Check whether or not the HDMI cable is properly connected. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Search Anynet+ devices again. ■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. ■ If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. The TV programme cannot be recorded. Check whether the antenna jack on the recording device is properly connected. English - 35 Teletext Feature Most television stations provide written information services via Teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. >■ For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. O □ (exit) Exit from the teletext display Q 6 (index) Used to display the index (contents) page at any time while you are viewing teletext. 3 8 (store) Used to store the teletext pages. O 4 (size) Press to display the double-size letters in the upper ...
Este manual também é adequado para os modelos :TV - LE32A431 (11.52 mb)
TV - LE37A430 (11.52 mb)
TV - LE37A431 (11.52 mb)
TV - LE40A430 (11.52 mb)