Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
These names can be changed, allowing you to assign new names. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER® button. 2. Press the ▲ or ▼ button to select "Name", then press the ENTER® button. 3. If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER® button. ^ The selection bar is displayed around the name box. To... Then... Select a letter, number or symbol Press the ▲ or ▼ button Move on the next letter Press the ► button Move back the previous letter Press the ◄ button Confirm the name Press the ENTER® button ^ The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space) 5. Repeat steps 3 to 4 for each channel to be assigned to a new name. 6. Press the EXIT button to exit. English - 14 Fine Tuning Channel Reception Use fine tuning to manually adjust a particular channel for optimal reception. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER® button. 3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER® button. 4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTER® button. 5. Press the EXIT button to exit. ^ Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red. ^ To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER® button. LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER® button. 2. Press the ▲ or ▼ button to select "LNA", then press the ENTER® button. 3. Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER® button. 4. Press the EXIT button to exit. English - 15 Changing the Picture Standard s « Backlight Contrast Brightness Sharpness Colour I Tint Detailed Settings Picture Options Reset Picture R 50 Move B1 Enter Return | You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER® button, to select "Picture". 2. Press the ENTER© button again, to select "Mode". 3. Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER© button. 4. Press the EXIT button to exit. ♦ Dynamic: Selects the picture for high-definition in a bright room. ♦ Standard: Selects the picture for optimum display in a normal environment. ♦ Movie: Selects the picture for comfortable display in a dark room. >■ The Picture mode must be adjusted separately for each input source. You can also press the P.MODE button on the remote control to select one of the picture settings. _ _ (tDOMpQ ( P.SIZE ) ( DMA ) (ÊMÔDÈ) (P.MOPQ^I | Easy Setting 1. Press the 2. Press the 3. Press the 4. Press the tools Anynet+ (HDMI-CEC) I Picture Mode ◄ Standard ► 1 Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l-ll : Mono English - 16 Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. 1. To select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 16) 2. Press the ▲ or ▼ button to select a particular item. Press the ENTER© button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER© button. 4. Press the EXIT button to exit. ♦ Backlight: Adjusts the screen brightness by adjusting the LCD backlight brightness. (0~10) ♦ Contrast: Adjusts the lightness and darkness between objects and the background. ♦ Brightness: Adjusts the brightness of the whole screen. ♦ Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. ♦ Colour: Adjusts the colours, making them lighter or darker. ♦ Tint: Adjusts the colour of objects, making them more red or green for a more natural look. Dip Backlight IZ HH 7 D Return The adjusted values are stored according to the selected Picture mode. In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”. (26, 32, 37 inch) In PC mode, you can only make changes to “Contrast” and “Brightness”. (40 inch) In TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 18) Configuring Detailed Settings on the Picture You can set detailed picture settings. 1. Pres...
Este manual também é adequado para os modelos :TV - LE26A450 (10.15 mb)
TV - LE26A451 (10.15 mb)
TV - LE32A450 (10.15 mb)
TV - LE32A454 (10.15 mb)