Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
However, if the device is recording, it may not be turned off. Setup Anynet+ (HDMI-CEC) : On Auto Turn Off : | No Searching Connections I_Yes ▼ Move 0 Enter “D Return English - 56 Y Y Y Scanning and Switching between Anynet+ Devices Select Device > Record > 7 Menu on Device > — Device Operation > • , Receiver :Off > Setup > ▼ Move Q1 Enter 'D Return Setup Anynet+ (HDMI-CEC) : : On > Auto Turn Off : Yes > Searching Connections > 1. Press the TOOLS button. Then press the ENTER® button to select "Anynet+(HDMI-CEC)". 2. Press the ▲ or ▼ button to select "Select Device", then press the ENTERS' button. 3. Press the ▲ or ▼ button to select to a particular device and press the ENTERS button. It is switched to the selected device. 4. If you cannot find a device you want, press the ▲ or ▼ button to select "Setup", then press the ENTERS button. 5. Press the ▲ or ▼ button to select "Searching Connections", then press the ENTERS button. The message "Configuring Anynet+ connection..." is displayed. When searching devices completes, the connected devices are listed in the Anynet+ menu. ^ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. The time required to scan for devices is determined by the number of connected devices. When the device scan is complete, the number of found devices is not displayed. Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select "Searching Connections" menu to search devices. ^ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button. English - 57 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Your TV connects to the corresponding device. Record Starts a recording. (This menu works only for a device supporting recording.) Menu on Device Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder's title menu appears. Device Operation Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Receiver Sound is output through the receiver. Setup You can set the environment for using Anynet+. TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. Numeric buttons ▲ /▼/◄/►/ENTERS' buttons Colour buttons EXIT button After switching to the device, while playing a file Q±) (Backward search)/ (E> (Forward search)/ CsD(Stop)/^D (Play)/ GD (Pause) Device with built-in Tuner After switching to the device, when you are watching a TV programme P A / v button Audio Device When Receiver is activated + / - button MUTE button ^ The Anynet+ function only works when the remote control is set to TV. ^ The CZD button works only while in the recordable state. ^ You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. ^ The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device. ^ The Anynet+ functions don't operate for the products from other manufacturers. ^ In Anynet+ mode, the colour buttons may not work properly. ^ The^P, (TT> operations may differ depending on the device. English - 58 Recording You can make a recording of a TV programme using a recorder. Press the C»D button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) ^ The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. ^ You can also record the source streams by selecting "Record" after pressing the TOOLS button. ^ Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. Listening through a Receiver_ You can listen to sound through a receiver instead of the TV speaker. 1. Press the TOOLS button. Then Press the ENTERS' button to select "Anynet+(HDMI-CEC)". Press the ▲ or ▼ button to select "Receiver", then press the ENTERS button. 2. Press the ◄ or ► button to select to "On", then press the ENTERS button. Now you can listen to sound through the receiver. 3. Press the EXIT button to exit. ^ When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. ^ If the receiver is exclusively for a home t...
Este manual também é adequado para os modelos :TV - LE32A756R1F (24.15 mb)